91

Preprogrammed Systems

Preprogrammed Systems
Your scanner is preprogrammed with frequencies used at
races within the Formula 1.
By default, one of the racing systems are unlocked, and
your scanner begins to scan them when you turn it on. To
speed up scanning, you can lock out systems that are
beyond your reception area (typically no more than a few
kilometers using the supplied stub antenna).
Follow these steps to lock out systems:.
1. Press and hold .
2. While continuing to hold , rotate the scroll control
to select a system you want to lock out.
3. While continuing to hold , press L/O to lock out
the system.
4. Repeat Steps 2, 3, and 4 to lock out additional
systems.
The preprogrammed systems provide a starting point;
you will want to find out more information about your local
radio systems so you can customize the programming to
better suit your listening preferences.
Notes:
• To free up memory, you can delete systems that you
will not be monitoring. Refer to “Deleting Systems” on
Page 57.
• Data used for the preprogrammed information was
supplied courtesy of http://www.racescanner.eu,
the Internet’s premier scanning resource.
Func
Func
Func

Preprogrammed Systems

USC230.book Page 91 Thursday, August 3, 2006 10:47 AM