SC230 Paper OM 062206.fm Page 22 Friday, July 21, 2006 7:39 PM

Setting Up Your Scanner

These guidelines will help you install and set up your new scanner:

If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source.

To improve the scanner’s reception, use an optional external antenna designed for multi-band coverage. (You can purchase this type of antenna at a local electronics store). If the optional antenna has no cable, use 50-70 Ω coaxial cable for lead-in.

A mating plug might be necessary for the optional antennas.

Use the supplied mono headset for private listening. Read the precautions on the inside front cover of this Owners Manual.

Do not use the scanner in high-moisture environments such as the kitchen or bathroom.

Avoid placing the scanner in direct sunlight or near heating elements or vents.

Using Internal Batteries

You can power your scanner using supplied rechargeable AA batteries.

Using Rechargeable Batteries

Before you use Ni-MH or Ni-Cd batteries, you must charge them.

The scanner has a built-in circuit that lets you recharge Ni-MH or Ni-Cd batteries while they are in the scanner. To charge the batteries;

1.Make sure the power is turned off.

2.Slide the battery compartment cover.

Setting Up Your Scanner

22

Page 22
Image 22
Uniden USC230 owner manual Setting Up Your Scanner, Using Internal Batteries, Using Rechargeable Batteries