Entering/Editing a Car Number, Editing a Driver | Uniden USC230

SC230 Paper OM 062206.fm Page 49 Friday, July 21, 2006 7:39 PM

Entering/Editing a Car Number

Menu

Program SysteM

E

Select the system			E
Edit	Car	E
Select the car			E
Edit	Car No	E

1.Rotate the scroll control to select the first digit, then press 0-9to enter the correct digit.

2.Repeat Step 1 to enter or correct the second and third digits if necessary, Then press E or press down on the scroll control to accept the setting.

Hints:

•Each car number can be up to three digits.

•Press to delete the entire car number.

Editing a Driver

Menu

Program SysteM

E

Select the system			E
Edit	Car	E
Select the car			E
Edit	Driver	E

1.Rotate the scroll control to select the first letter.

2.Press and hold down Func then rotate the scroll control once to select the next letter.

3.Repeat Steps 1 and 2 until you have entered the driver’s name. Then press E or press down on the scroll control to accept the setting.

Hints:

•Each driver’s name can be up to 12 characters. Abbreviate as necessary to fit.

•Press twice to delete the current character.

•Press three times to clear the entire driver name.

Programming Radio Systems

49

Image 49

Uniden USC230 owner manual Entering/Editing a Car Number, Editing a Driver

Contents

OWNER’S Manual Precautions Precautions SC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction Introduction Mode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature Highlights Feature Highlights Auto Store How the Scanner’s Controls Are Represented in This Manual About This Manual Entering Text What is Searching? What is Scanning?Understanding Scanning Understanding the Scanner’s Memory What is CTCSS/DCS? Ctcss Frequencies Hz Conventional Scanning Using the Scanner at the Racetrack Simplex Operation Where To Get More InformationRepeater Operation Information On The Internet Included With Your Scanner Included With Your Scanner Using Internal Batteries Setting Up Your ScannerUsing Rechargeable Batteries Setting Up Your Scanner Using Non-rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/HeadphoneAttaching the Belt Clip Attaching the Wrist Strap Installing the Demo Software Key Name Description Look At The Keypad + 1-9, 0/Race Selects Rcl Look At The Display Using Func Using MenuUsing the Scroll Control Basic Operation Turning On the Scanner Setting the SquelchScanning Systems Basic Operation Scanning Preprogrammed Races When You Get To The TrackBefore You Get To The Track Selecting Interference Eliminator Codes Selecting Systems to Scan Locking/Unlocking Systems Selecting System Channel Groups Temporarily Holding On a System Locking/Unlocking ChannelsHolding On a Channel Quickly Recalling Channels Quick-Storing Channels Other Settings Initializing the Scanner’s Memory Using the Backlight Connecting Your Scanner to a Personal Computer Using the PC Control Cloning Options Cloning the Scanner Using the Menu Using the Menu Set up Priority Scan Quickly Programming Racing Systems Programming Radio SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Editing the Car Manually Programming Racing Systems Editing a Driver Entering/Editing a Car Number Editing a Car’s Channel Setting a Car’s Quick KeyDeleting a Car Programming Conventional Systems Setting Lockout On a Car Entering/Editing Conventional Channels Entering/Editing Conventional Channel Groups Programming Radio Systems Programming/Editing Optional Settings System-Level SettingsEditing the System Name Editing the System Quick Key Conventional Systems Only Setting the System Hold Time Setting Group Lockout Setting Data Skip Setting the Channel Delay Time Deleting Systems Group-Level SettingsCopying Systems Entering/Editing the Group Name Edit Group Select the group Set Quick Key Setting the Group Quick Key Deleting Groups Channel-Level SettingsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting CTCSS/DCS Setting Channel Alert Setting Channel Modulation Setting the Frequency Step Setting Channel Attenuation Deleting Channels Setting Channel Lockout Copying/Pasting Channels Searching and Storing Service SearchChanging the step of Air Band Quick Search Custom Search CTCSS/DCS Search Custom Frequency MHz Preset Custom Search Range Custom Editing a Custom Search Range Auto Search and Store Storing a System Selecting a System Using the Close Call Feature Using the Close Call Feature Turn the scroll control to select an option Setting Close Call Options Using the Close Call Feature Close Call Hits Managing Locked-Out Frequencies Search and Close Call OptionsSearching for Subaudible Tones Unlocking All Frequencies Setting the Modulation Type Setting the Maximum Auto Store Value Setting Data Skip Setting AttenuationSetting the Delay Time Setting the Search Frequency Step Cleaning Care and MaintenanceGeneral Use Location Troubleshooting Troubleshooting Troubleshooting Specifications Specifications Optional Accessories Optional Accessories Collecting Information PlanningPlanning Planning Race Name Filling Out The Racing System WorksheetCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet System Name and Quick Key Filling Out The Conventional System WorksheetGroup Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCS Conventional System W orksheet Conventional System Worksheet Preprogrammed Systems Preprogrammed Systems Declaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0