Programming Conventional Systems | Uniden USC230 instruction

SC230 Paper OM 062206.fm Page 51 Friday, July 21, 2006 7:39 PM

Setting Lockout On A Car

Menu

Program SysteM

E

Select the system		E
Edit Car	E
Select the car		E

Set Lockout E

This setting determines whether the scanner will scan this car when it is enabled. Select your setting, then press E.

Lockout - the car is not scanned. Unlocked - the car is scanned.

Note: The default setting is Unlocked.

Programming Conventional Systems

		Program SysteM		E
	Menu
New System			E	Conventional
E		Confirm?	E

The scanner creates an empty conventional system, with

a default name of System nnn C. nnn increments as you add new systems. C indicates that this is a conventional system.

Refer to the appropriate section to set system-wide options:

•See “Editing the System Name” on Page 54

•See “Editing the System Quick Key (Conventional Systems Only)” on Page 54

•See “Setting Group Lockout” on Page 55

•See “Setting the System Hold Time” on Page 55

•See “Setting the Channel Delay Time” on Page 56

•See “Setting Data Skip” on Page 56

•See “Deleting Systems” on Page 57

•See “Copying Systems” on Page 57

•See “Entering/Editing Conventional Channel Groups” on Page 52

Programming Radio Systems

51

Image 51

Uniden USC230 owner manual Programming Conventional Systems, Setting Lockout On a Car

Contents

OWNER’S Manual Precautions Precautions SC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction Introduction Mode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature Highlights Feature Highlights Auto Store How the Scanner’s Controls Are Represented in This Manual About This Manual Entering Text Understanding the Scanner’s Memory What is Scanning?What is Searching? Understanding Scanning What is CTCSS/DCS? Ctcss Frequencies Hz Conventional Scanning Using the Scanner at the Racetrack Where To Get More Information Simplex OperationRepeater Operation Information On The Internet Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Rechargeable Batteries Using Non-rechargeable Batteries Setting Up Your Scanner Using AC Power Connecting the AntennaConnecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension SpeakerAttaching the Belt Clip Attaching the Wrist Strap Installing the Demo Software Key Name Description Look At The Keypad + 1-9, 0/Race Selects Rcl Look At The Display Using Menu Using FuncUsing the Scroll Control Basic Operation Turning On the Scanner Setting the SquelchBasic Operation Scanning Systems When You Get To The Track Scanning Preprogrammed RacesBefore You Get To The Track Selecting Interference Eliminator Codes Selecting Systems to Scan Locking/Unlocking Systems Selecting System Channel Groups Locking/Unlocking Channels Temporarily Holding On a SystemHolding On a Channel Quickly Recalling Channels Quick-Storing Channels Other Settings Initializing the Scanner’s Memory Using the Backlight Connecting Your Scanner to a Personal Computer Using the PC Control Cloning Options Cloning the Scanner Using the Menu Using the Menu Set up Priority Scan Programming Radio Systems Quickly Programming Racing SystemsProgramming Radio Systems Enter Driver Programming Radio Systems Editing the Car Manually Programming Racing Systems Editing a Driver Entering/Editing a Car Number Setting a Car’s Quick Key Editing a Car’s ChannelDeleting a Car Programming Conventional Systems Setting Lockout On a Car Entering/Editing Conventional Channels Entering/Editing Conventional Channel Groups Programming Radio Systems Editing the System Quick Key Conventional Systems Only System-Level SettingsProgramming/Editing Optional Settings Editing the System Name Setting the System Hold Time Setting Group Lockout Setting Data Skip Setting the Channel Delay Time Entering/Editing the Group Name Group-Level SettingsDeleting Systems Copying Systems Edit Group Select the group Set Quick Key Setting the Group Quick Key Channel-Level Settings Deleting GroupsEditing the Channel Name Conventional Systems Only Setting Channel Priority Setting CTCSS/DCS Setting Channel Alert Setting Channel Modulation Setting the Frequency Step Setting Channel Attenuation Deleting Channels Setting Channel Lockout Copying/Pasting Channels Quick Search Service SearchSearching and Storing Changing the step of Air Band Custom Search CTCSS/DCS Search Custom Frequency MHz Preset Custom Search Range Custom Editing a Custom Search Range Auto Search and Store Storing a System Selecting a System Using the Close Call Feature Using the Close Call Feature Turn the scroll control to select an option Setting Close Call Options Using the Close Call Feature Close Call Hits Unlocking All Frequencies Search and Close Call OptionsManaging Locked-Out Frequencies Searching for Subaudible Tones Setting the Modulation Type Setting the Maximum Auto Store Value Setting Attenuation Setting Data SkipSetting the Delay Time Setting the Search Frequency Step Location Care and MaintenanceCleaning General Use Troubleshooting Troubleshooting Troubleshooting Specifications Specifications Optional Accessories Optional Accessories Planning Collecting InformationPlanning Planning Filling Out The Racing System Worksheet Race NameCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet Frequency-Alpha Tag-Priority-CTCSS/DCS Filling Out The Conventional System WorksheetSystem Name and Quick Key Group Name and Quick Key Conventional System W orksheet Conventional System Worksheet Preprogrammed Systems Preprogrammed Systems Declaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0