Uniden USC230 Search and Close Call Options

76

Search and Close Call Options

Search and Close Call Options

The settings in this section affect custom searches,

service searches, and Close Call operation.

Managing Locked-Out Frequencies

While searching or during Close Call operation, if you

press L/O while the scanner is stopped on a frequency,

that frequency is locked out of these modes. You can lock

out up to 200 frequencies.

Note: Locking out a frequency does not lock out a

channel that contains that frequency.

Unlocking All Frequencies

  Srch/CloCall Opt  E 

Freq Lockouts  E   Unlock All  E

The scanner prompts you to confirm deletion. To confirm

and delete all locked-out frequencies, press E. Otherwise,

to cancel, press No.

Reviewing Locked Out Frequencies

  Srch/CloCall Opt  E 

Freq Lockouts  E   Rvw Search L/O  E

The scanner displays the first locked-out frequency and

prompts you to unlock the frequency. Press E to unlock

the frequency. Or, rotate the scroll control or press No to

select a different frequency. To exit the review, press

.

Searching for Subaudible Tones

  Srch/CloCall Opt  E 

CTCSS/DCS Search  E

This setting controls whether the scanner will search for a

subaudible tone when it stops on a transmission during

search or Close Call operation.

Off The scanner does not search for subaudible tones.

On The scanner searches for and displays any

subaudible tone found.

Menu

Menu

Menu

Menu

Search and Close Call Options

SC230 Paper OM 062206.fm Page 76 Friday, July 21, 2006 7:39 PM

Contents

Main Precautions Precautions Precautions WARNI NG! Contents Contents Page Page Introduction Introduction Page Page Feature Highlights Feature Highlights General Page Auto Store Priority Backlight and Power Key Controls About This Manual Entering Text Understanding Scanning Understanding Scanning Understanding the Scanners Memory What is Scanning? What is Searching? What is CTCSS/DCS? Page Using the Scanner at the Racetrack Conventional Scanning Simplex Operation Repeater Operation Where To Get More Information Information On The Internet Included With Your Scanner Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your Scanner Using Internal Batteries Using Rechargeable Batteries Using Non-rechargeable Batteries WARNING! Using AC Power Connecting the Antenna Connecting an Optional Antenna Connecting an Earphone/Headphone Connecting an Extension Speaker WARNING! Attaching the Belt Clip Attaching the Wrist Strap Installing the Demo Software A Look At The Keypad Page Page A Look At The Display Using Menu Using Func Using the Scroll Control Basic Operation Basic Operation Turning On the Scanner and Setting the Squelch Scanning Systems Scanning Preprogrammed Races Before You Get To The Track When You Get To The Track Selecting Driver Frequencies Holding on a Car Selecting Systems to Scan Selecting System Channel Groups Locking/Unlocking Systems Locking/Unlocking Channels Temporarily Holding On a System Holding On a Channel Quick-Storing Channels Quickly Recalling Channels Other Settings Other Settings Displaying System Information Adjusting the Key Beep Locking/Unlocking the Keypad Turning Power Save On or Off Using the Backlight Initializing the Scanners Memory Using the PC Control and Cloning Options Page Using the Menu Using the Menu Using the Menu Programming Radio Systems Programming Radio Systems Quickly Programming Racing Systems Page Page Manually Programming Racing Systems Page Page Programming Conventional Systems Entering/Editing Conventional Channel Groups Setting Up a Channel Group Edit Group E New Group E Page System-Level Settings Page Page Group-Level Settings Page Channel-Level Settings Page Page Page Page Page Page Searching and Storing Searching and Storing Service Search Changing the step of Air Band Quick Search CTCSS/DCS Search Custom Search Preset Custom Search Range Page Editing a Custom Search Range Auto Search and Store Selecting a System Storing a System Using the Close Call Feature Using the Close Call Feature Setting Close Call Options Page Close Call Hits Search and Close Call Options Search and Close Call Options Managing Locked-Out Frequencies Searching for Subaudible Tones Search and Close Call Options Setting the Maximum Auto Store Value Setting the Modulation Type Setting Attenuation Setting Data Skip Setting the Delay Time Search and Close Call Options Setting the Search Frequency Step Care and Maintenance Care and Maintenance Care and Maintenance General Use Location Troubleshooting Troubleshooting Troubleshooting If your USC230 is not performing properly, try these steps. Problem Possible Cause Suggestion Page Specifications Specifications Specifications Page Planning Planning Collecting Information Page Page Page Filling Out The Conventional System Worksheet System Name and Quick Key Group Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCS Page Preprogrammed Systems Preprogrammed Systems Preprogrammed Systems Declaration of Conformity Declaration of Conformity Declaration of Conformity