41
Other Settings
• If you want to program the deleted data again, use
the PC Control and cloning options (see page 41).
Using the PC Control and Cloning Options
Use the included connection cable to connect your scanner
to another USC230 scanner or your personal computer.
Xfer Information E
•PC Control Lets you set the baud rate your scanner
uses to communicate with a personal computer. See
“Connecting Your Scanner to a Personal Computer”.
•WIRED Clone Lets you set your scanner as a master
or a slave, letting you transfer programming to or from
another USC230 scanner. See “Cloning the Scanner”
on Page 42.
Connecting Your Scanner to a
Personal Computer
To connect your scanner to a
personal computer, you must
first set the scanner’s baud rate
(the rate at which data is
transferred between the
scanner and the computer, in
bits per second (bps)).
Hint: If you have trouble
transferring data between your
scanner and your
computer, try setting the baud
rate to a slower setting.
Xfer Information
E
PC Control E  
•Off The baud rate is not set.
•9600 bps The baud rate is set to 9600 bps.
•19200 bps The baud rate is set to 19,200 bps.
Menu
Menu
SC230 Paper OM 062206.fm Page 41 Friday, July 21, 2006 7:39 PM