Setting Channel Modulation | Uniden USC230 specification

SC230 Paper OM 062206.fm Page 62 Friday, July 21, 2006 7:39 PM

DCS - the scanner only opens squelch if the DCS tone you select is also present with the signal. The scanner then prompts you to scroll to the desired tone.

Set Lockout - the scanner does not stop on the channel if the tone you select is present. The scanner prompts you to select a CTCSS or DCS tone.

Notes:

•The default setting is Off.

•See “What is CTCSS/DCS?” on Page 16 for a complete list of CTCSS and DCS tones.

Setting Channel Modulation

Menu

program system

E

Select the system		E
Edit Group	E
Select the group		E
Edit Channel		E
Select the channel		E
Set Modulation		E

This setting controls the demodulation method used for the channel. Select your setting, then press E.

Auto - the scanner uses the default modulation for the frequency (see the table at the front of the manual).

AM - the scanner uses AM (amplitude modulation) for the frequency.

FM - the scanner uses FM (frequency modulation) for the frequency.

NFM - the scanner uses narrowband FM for the frequency.

Note: The default setting is AUTO.

Programming/Editing Optional Settings

62

Image 62

Uniden USC230 owner manual Setting Channel Modulation

Contents

OWNER’S Manual Precautions Precautions SC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction Introduction Mode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature Highlights Feature Highlights Auto Store About This Manual How the Scanner’s Controls Are Represented in This Manual Entering Text Understanding Scanning What is Scanning?What is Searching? Understanding the Scanner’s Memory What is CTCSS/DCS? Ctcss Frequencies Hz Using the Scanner at the Racetrack Conventional Scanning Repeater Operation Where To Get More InformationSimplex Operation Information On The Internet Included With Your Scanner Included With Your Scanner Using Rechargeable Batteries Setting Up Your ScannerUsing Internal Batteries Setting Up Your Scanner Using Non-rechargeable Batteries Setting Up Your Scanner Connecting an Optional Antenna Using AC PowerConnecting the Antenna Attaching the Belt Clip Connecting an Earphone/HeadphoneConnecting an Extension Speaker Installing the Demo Software Attaching the Wrist Strap Look At The Keypad Key Name Description + 1-9, 0/Race Selects Rcl Look At The Display Using the Scroll Control Using MenuUsing Func Scanning Systems Turning On the Scanner Setting the SquelchBasic Operation Basic Operation Before You Get To The Track When You Get To The TrackScanning Preprogrammed Races Selecting Systems to Scan Selecting Interference Eliminator Codes Selecting System Channel Groups Locking/Unlocking Systems Holding On a Channel Locking/Unlocking ChannelsTemporarily Holding On a System Quick-Storing Channels Quickly Recalling Channels Other Settings Using the Backlight Initializing the Scanner’s Memory Using the PC Control Cloning Options Connecting Your Scanner to a Personal Computer Cloning the Scanner Using the Menu Using the Menu Set up Priority Scan Programming Radio Systems Programming Radio SystemsQuickly Programming Racing Systems Enter Driver Programming Radio Systems Manually Programming Racing Systems Editing the Car Entering/Editing a Car Number Editing a Driver Deleting a Car Setting a Car’s Quick KeyEditing a Car’s Channel Setting Lockout On a Car Programming Conventional Systems Entering/Editing Conventional Channel Groups Entering/Editing Conventional Channels Programming Radio Systems Editing the System Name System-Level SettingsProgramming/Editing Optional Settings Editing the System Quick Key Conventional Systems Only Setting Group Lockout Setting the System Hold Time Setting the Channel Delay Time Setting Data Skip Copying Systems Group-Level SettingsDeleting Systems Entering/Editing the Group Name Setting the Group Quick Key Edit Group Select the group Set Quick Key Editing the Channel Name Conventional Systems Only Channel-Level SettingsDeleting Groups Setting Channel Priority Setting Channel Alert Setting CTCSS/DCS Setting Channel Modulation Setting Channel Attenuation Setting the Frequency Step Setting Channel Lockout Deleting Channels Copying/Pasting Channels Changing the step of Air Band Service SearchSearching and Storing Quick Search CTCSS/DCS Search Custom Search Preset Custom Search Range Custom Frequency MHz Custom Auto Search and Store Editing a Custom Search Range Selecting a System Storing a System Using the Close Call Feature Using the Close Call Feature Setting Close Call Options Turn the scroll control to select an option Using the Close Call Feature Close Call Hits Searching for Subaudible Tones Search and Close Call OptionsManaging Locked-Out Frequencies Unlocking All Frequencies Setting the Maximum Auto Store Value Setting the Modulation Type Setting the Delay Time Setting AttenuationSetting Data Skip Setting the Search Frequency Step General Use Care and MaintenanceCleaning Location Troubleshooting Troubleshooting Troubleshooting Specifications Specifications Optional Accessories Optional Accessories Planning PlanningCollecting Information Planning Car #/Driver-Frequency-Priority-CTCSS/DCS Filling Out The Racing System WorksheetRace Name Racing System Worksheet Group Name and Quick Key Filling Out The Conventional System WorksheetSystem Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCS Conventional System Worksheet Conventional System W orksheet Preprogrammed Systems Preprogrammed Systems Declaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0