Specifications | Uniden USC230 specs

SC230 Paper OM 062206.fm Page 83 Friday, July 21, 2006 7:39 PM

Specifications

Dynamic Allocation Capacity

(with Name Assigned To Each System, Group, and

Channel):

Systems:		200 max
Groups:
Conventional Systems		........................ 20 per system
Racing Systems		No Limit
Channels:		up to 2500
Attenuation:		18 dB (nominal), 10 dB (limit)
Frequency Range (MHz):		See page 7 to 9
Operating Temperature:
Normal		–20°C to +60°C
Close Call		–10°C to +60°C
Scan Rate:		100 channels per second
		(conventional mode)
Search Rate:	300 steps per second (5 kHz step only)
Scan Delay:		0-5 seconds

Audio Output: .. 320mW nominal into 8Ω internal speaker 30 mW nominal into 32Ω headphone 6 mW nominal into 64Ω earphone

Power Requirements:

2 AA Alkaline Batteries (3V DC), or 2 AA Rechargeable Ni-MH Batteries (2.4V DC), or AC Adapter (6 VDC 500mA) (AD-671)

Antenna:	..............................................	50 Ω (Impedance)
External Jacks:
Antenna Jack		BNC Type
Headphone Jack			3.5mm
DC Power Jack (EIAJ TYPE-2 Center Positive)			5.5mm
Remote Jack		4	Pin Mini
Size:	72.4 mm (W) x 34.5 mm (D) x 138.5 mm (H)
Weight:			179.3 g

Features, specifications, and availability of optional accessories are all subject to change without notice.

Specifications

83

Image 83

Uniden USC230 owner manual Specifications

Contents

OWNER’S Manual Precautions Precautions SC230 Paper OM 062206.fm Page 3 Friday, July 21, 2006 739 PM Contents Using the Menu Programming Radio Systems Setting Close Call Options Close Call Hits Introduction Introduction Mode Step kHz SC230 Paper OM 062206.fm Page 9 Friday, July 21, 2006 739 PM Feature Highlights Feature Highlights Feature Highlights Auto Store How the Scanner’s Controls Are Represented in This Manual About This Manual Entering Text Understanding the Scanner’s Memory What is Scanning?What is Searching? Understanding Scanning What is CTCSS/DCS? Ctcss Frequencies Hz Conventional Scanning Using the Scanner at the Racetrack Repeater Operation Where To Get More InformationSimplex Operation Information On The Internet Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Rechargeable Batteries Using Non-rechargeable Batteries Setting Up Your Scanner Connecting an Optional Antenna Using AC PowerConnecting the Antenna Attaching the Belt Clip Connecting an Earphone/HeadphoneConnecting an Extension Speaker Attaching the Wrist Strap Installing the Demo Software Key Name Description Look At The Keypad + 1-9, 0/Race Selects Rcl Look At The Display Using the Scroll Control Using MenuUsing Func Basic Operation Turning On the Scanner Setting the SquelchBasic Operation Scanning Systems Before You Get To The Track When You Get To The TrackScanning Preprogrammed Races Selecting Interference Eliminator Codes Selecting Systems to Scan Locking/Unlocking Systems Selecting System Channel Groups Holding On a Channel Locking/Unlocking ChannelsTemporarily Holding On a System Quickly Recalling Channels Quick-Storing Channels Other Settings Initializing the Scanner’s Memory Using the Backlight Connecting Your Scanner to a Personal Computer Using the PC Control Cloning Options Cloning the Scanner Using the Menu Using the Menu Set up Priority Scan Programming Radio Systems Programming Radio SystemsQuickly Programming Racing Systems Enter Driver Programming Radio Systems Editing the Car Manually Programming Racing Systems Editing a Driver Entering/Editing a Car Number Deleting a Car Setting a Car’s Quick KeyEditing a Car’s Channel Programming Conventional Systems Setting Lockout On a Car Entering/Editing Conventional Channels Entering/Editing Conventional Channel Groups Programming Radio Systems Editing the System Quick Key Conventional Systems Only System-Level SettingsProgramming/Editing Optional Settings Editing the System Name Setting the System Hold Time Setting Group Lockout Setting Data Skip Setting the Channel Delay Time Entering/Editing the Group Name Group-Level SettingsDeleting Systems Copying Systems Edit Group Select the group Set Quick Key Setting the Group Quick Key Editing the Channel Name Conventional Systems Only Channel-Level SettingsDeleting Groups Setting Channel Priority Setting CTCSS/DCS Setting Channel Alert Setting Channel Modulation Setting the Frequency Step Setting Channel Attenuation Deleting Channels Setting Channel Lockout Copying/Pasting Channels Quick Search Service SearchSearching and Storing Changing the step of Air Band Custom Search CTCSS/DCS Search Custom Frequency MHz Preset Custom Search Range Custom Editing a Custom Search Range Auto Search and Store Storing a System Selecting a System Using the Close Call Feature Using the Close Call Feature Turn the scroll control to select an option Setting Close Call Options Using the Close Call Feature Close Call Hits Unlocking All Frequencies Search and Close Call OptionsManaging Locked-Out Frequencies Searching for Subaudible Tones Setting the Modulation Type Setting the Maximum Auto Store Value Setting the Delay Time Setting AttenuationSetting Data Skip Setting the Search Frequency Step Location Care and MaintenanceCleaning General Use Troubleshooting Troubleshooting Troubleshooting Specifications Specifications Optional Accessories Optional Accessories Planning PlanningCollecting Information Planning Car #/Driver-Frequency-Priority-CTCSS/DCS Filling Out The Racing System WorksheetRace Name Racing System Worksheet Frequency-Alpha Tag-Priority-CTCSS/DCS Filling Out The Conventional System WorksheetSystem Name and Quick Key Group Name and Quick Key Conventional System W orksheet Conventional System Worksheet Preprogrammed Systems Preprogrammed Systems Declaration of Conformity Declaration of ConformityPage Page Page Uniden Corporation All rights reserved UBZZ01346ZZ0