SC230 Paper OM 062206.fm Page 47 Friday, July 21, 2006 7:39 PM
8.Set the modulation type (Auto is almost always the correct choice), then press E
9.Set the attenuator (turn it on to eliminate interference from other sources), then press E
10.Set the channel priority (turn it on if you want the scanner to interrupt operation every few seconds to check for transmissions by this driver), then press E
Set Modulation Auto
Set Attenuator Off
Set Priority Off
11.Set alert (turn it on if you want the scanner to sound a special alert when this car transmits), then press E
Set Alert Off
12.If you have another frequency to enter for this driver, press E then repeat from Step 5. Otherwise, press No
Another Freq for This driver?
13.To enter another car in this race, press E then repeat from Step 3.
Otherwise, press No
14.When you finish, press Scan to begin scanning the race
Another Car For This Race?
Complete Press SCAN key
Programming Radio Systems
47
