Pioneer PDP-436RXE manual Power Control, Energy Save, No Signal off, No Operation off

08Basic Adjustment Settings

Power Control

Power Control provides convenient functions for power saving.

Energy Save

You may use one of the three Energy Save modes to save power consumption.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “Energy Save” (/ then ENTER).

4Select “Save1”, “Save2”, or “Picture Off” (/ then

ENTER).

Item	Description
Standard	Does not decrease the picture brightness.
Save1	Slightly lowers power consumption while
	slightly suppressing the brightness drop level.
Save2	Decreases the picture brightness and lowers
	power consumption.
Picture Off	Deactivates the screen to save power. To restore
	the screen display, press any button other than
	i+/i– and e.
	This setting is not memorised by the system.

5Press HOME MENU to exit the menu.

NOTE

•The PIC OFF indicator on the front of the Plasma Display lights up in orange when the Picture off is selected.

No Signal off

The system will be automatically placed into the standby mode if no signal is received for 15 minutes.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “No Signal off” (/ then ENTER).

4Select “Enable” (/ then ENTER).

Item	Description
Disable	Does not place the system into the standby
(factory default)	mode.
Enable	Places the system into the standby mode if no
	signal is received for 15 minutes.

5Press HOME MENU to exit the menu.

NOTE

•Five minutes before the system is placed into the standby mode, a message appears every minute.

•The system may not be placed into the standby mode when noise signals are present at the Plasma Display after a TV programme finishes.

32

No Operation off

The system will be automatically placed into the standby mode when no operation is performed for three hours.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “No Operation off” (/ then ENTER).

4Select “Enable” (/ then ENTER).

Item	Description
Disable	Does not place the system into the standby
(factory default)	mode.
Enable	Places the system into the standby mode if no
	operation is performed for three hours.

5Press HOME MENU to exit the menu.

NOTE

•Five minutes before the system is placed into the standby mode, a message appears every minute.

En