Pioneer PDP-436RXE Reducing video noise, Setting Child Lock, Selecting a decoder input terminal

Basic Adjustment Settings

9 Select “System” ( / ).

10 Select a sound system ( / ).

• You can select from among “B/G”, “D/K”, “I”, “L”, and “L’”.

Manual Adjust

Programme Entry	1
Search	42.75MHz
System	B/G

11Select “Colour System” (/).

12Select a colour system (/).

•You can select from among “Auto”, “PAL”, “SECAM”, and “4.43NTSC”.

System	B/G
Colour System	Auto
Store	No

13Select “Store” (/).

14Select “Yes”, “Yes (Listed)”, or “No” (/).

	Colour System	Auto
	Store	Yes
	Tuner NR	On
Item		Description
Yes		You can select the channel using P +/P –.
Yes (Listed)		Select this option to register the channel as
		your favourite channel.
		You can select the channel using the Favourite
		Channel list and P +/P –.
No		You cannot select the channel using P +/P –.

•To set up for another channel, repeat steps 6 to 14. 15 Press HOME MENU to exit the menu.

NOTE

•The above procedure transfers and sets the selected channel information to the connected recording equipment such as a VCR or DVD recorder.

•Manual Adjust also allows you to make selections for “Tuner NR”, “Child Lock”, and “Decoder”. See “Reducing video noise”, “Setting Child Lock”, and “Selecting a decoder input terminal”.

Reducing video noise

For the individual channels, you can specify whether the Plasma Display System should reduce video noise depending on the levels of broadcasting signals.

1Repeat steps 1 to 6 provided for “Using Manual Adjust”.

•After selecting a channel (using Programme Entry), perform the following steps.

2Select “Tuner NR” (/).

3Select “On” or “Off” (/).

Store	Yes
Tuner NR	On
Child Lock	View

4Press HOME MENU to exit the menu.

NOTE

•This function may not achieve a satisfactory result, depending on the conditions of broadcasting signals.

•When using a decoder with a decoder terminal selected, this function may fail to achieve a good result.

Setting Child Lock

Child Lock inhibits selected TV channels from being tuned and watched.

1Repeat steps 1 to 6 provided for “Using Manual Adjust”.

After selecting a channel (using Programme Entry), perform the following steps.

2Select “Child Lock” (/).

3Select “Block” (/).

Tuner NR	On
Child Lock	Block
Decoder	Off

•The selection is switched between “View” and “Block”. 4 Press HOME MENU to exit the menu.

Selecting a decoder input terminal

If you have connected a decoder, select a decoder input terminal (INPUT1).

1Repeat steps 1 to 6 provided for “Using Manual Adjust”.

After selecting a channel (using Programme Entry), do the following steps.

2Select “Decoder” (/).

3Select “INPUT 1” (/).

Tuner NR	On
Child Lock	Block
Decoder	INPUT1

4Press HOME MENU to exit the menu.

NOTE

•With “Off” (factory default) selected, you cannot watch any images from the decoder.

08

English

25

En