Pioneer PDP-436RXE manual Using Colour Temp, Using CTI, Using Colour Management

Basic Adjustment Settings 08

Using Colour Temp

1Press HOME MENU.

2Select “Picture” (/ then ENTER).

3Select “Pro Adjust” (/ then ENTER).

4Select “Colour Detail” (/ then ENTER).

5Select “Colour Temp” (/ then ENTER).

6Select the desired parameter (/ then ENTER).

•If you have selected a desired parameter in this step, skip steps 7 and 8.

•You may rather want to perform fine adjustment. To do

this, select “Manual” first and then press and hold ENTER for more than three seconds. The manual adjustment screen appears. Then go to step 7.

Colour Temp

Adjusts the colour temperature, resulting in a better white balance.

Selections	High	White with bluish tone
	Mid-High	Intermediate tone between High and Mid
	Mid	Natural tone
	Mid-Low	Intermediate tone between Mid and Low
	Low	White with reddish tone
	Manual	Colour temperature adjusted to your
		preference

7Select an item to be adjusted (/ then ENTER).

8Select the desired level (/).

Item		button	button
R High	Fine adjustment	For weaker red	For stronger red
	for bright
G High		For weaker green	For stronger green
	portions
B High		For weaker blue	For stronger blue
R Low	Fine adjustment	For weaker red	For stronger red
	for dark
G Low		For weaker green	For stronger green
	portions
B Low		For weaker blue	For stronger blue

•To perform adjustment for another item, press RETURN, and then repeat steps 7 and 8.

•You may press / to immediately change an item to be adjusted.

9Press HOME MENU to exit the menu.

Using CTI

1Press HOME MENU.

2Select “Picture” (/ then ENTER).

3Select “Pro Adjust” (/ then ENTER).

4Select “Colour Detail” (/ then ENTER).

5Select “CTI” (/ then ENTER).

6Select the desired parameter (/ then ENTER).

CTI

Provides images with clearer colour contours. The CTI stands for Colour Transient Improvement.

Selections	Off	Deactivates the CTI.
	On	Activates the CTI.

7Press HOME MENU to exit the menu.

Using Colour Management

1Press HOME MENU.

2Select “Picture” (/ then ENTER).

3Select “Pro Adjust” (/ then ENTER).

4Select “Colour Detail” (/ then ENTER).

5Select “Colour Management” (/ then ENTER).

6Select an item to be adjusted (/ then ENTER).

Colour Management
R	0
Y	0
G	0
C	0
B	0
M	0

7Select the desired level (/).

Item	button	button
R	Closer to magenta	Closer to yellow
Y	Closer to red	Closer to green
G	Closer to yellow	Closer to cyan
C	Closer to green	Closer to blue
B	Closer to cyan	Closer to magenta
M	Closer to blue	Closer to red

•To perform adjustment for another item, press RETURN, and then repeat steps 6 and 7.

•You may press / to immediately change an item to be adjusted.

8Press HOME MENU to exit the menu.

English

29

En