Pioneer PDP-436RXE manual Sleep Timer, Using a password, Entering a password

Useful Adjustment Settings 09

Changing the brightness at both sides of the screen (Side Mask)

With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can change the brightness of the grey side masks that appear at both sides of the screen.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Side Mask” (/ then ENTER).

4Select the desired parameter (/ then ENTER).

Side Mask

Fixed

Auto

Item	Description
Fixed	Always sets the same brightness for the grey
(factory default)	side masks.
Auto	Adjusts the brightness of the grey side masks
	according to the brightness of images.

5Press HOME MENU to exit the menu.

NOTE

•If you select “Auto”, the selection for “Drive Mode” (page 33) becomes ineffective.

Sleep Timer

When the selected time elapses, the Sleep Timer automatically places the system into the standby mode.

1Press HOME MENU.

2Select “Sleep Timer” (/ then ENTER).

3Select the desired time (/ then ENTER).

•You can select from among “Off” (cancel), “30 min”, “60 min”, “90 min”, and “120 min”.

4Press HOME MENU to exit the menu.

NOTE

•Five minutes before the selected time elapses, the remaining time appears every minute.

•To check the remaining time, perform steps 1 and 2. After checking the time, press HOME MENU to restore the previous display.

•The SLEEP indicator on the front of the Plasma Display lights up in orange when the Sleep Timer is set.

Using a password

The Plasma Display System provides the Child Lock function for preventing children from watching inappropriate programmes. You need to enter a password when watching programmes with “Block” specified. Before the system is shipped, “1234” is preset as the factory-default password. You can however, change the password as you want.

When using the Home menu you select “Auto Installation”, “Analogue TV Setup”, or “Password”, a screen prompting password entry appears to prevent others from changing the programme settings at their choices.

Entering a password

In a case where you select a channel blocked with Child Lock or password entry is requested when attempting to open the menu, enter a password correctly.

1Enter a correct 4-digit password using buttons 0 – 9.

Please Input Your Password.

NOTE

•If you fail password entry three times, “Invalid password.” appears, and the menu is closed. In order to display the password entry screen again to unlock the password, select the blocked channel or open the menu again.

•If the password entry screen disappears before entry, you may recall it by pressing ENTER.

English

35

En