Pioneer PDP-436RXE manual Basic connections, Connecting the power cord, Plasma Display rear view

Preparation 05

Using a wall for stabilization

1.Attach falling prevention bolts (hooks) to the Plasma Display.

2.Use strong cords or chains to stabilize it appropriately and firmly to a wall, pillar, or other sturdy element.

• Perform this work in the same way on the left and right sides.

NOTE

Use hooks, ropes, chains, and fittings that are available on the market.

Recommended hook: Nominal diameter 8 mm Length 12 to 15 mm

Basic connections

Connecting the power cord

Plasma Display (rear view)

Europe, except

UK and Eire

UK and

Eire

Attaching the ferrite core

To help prevent noise, attach the supplied ferrite core to the connector end of the power cord as shown. Use the supplied cable tie to prevent the ferrite core from slipping on the cable.

	Ferrite core
	Cable tie
To power	To AC IN
outlet
AC power cord	As close as possible

NOTE

•Disconnect the power cord from the power outlet when the Plasma Display system is not going to be used for a long period of time.

English

15

En