Onkyo instruction manual Turning On the C-1VL, Connecting the Supplied Power Cord

Turning On the C-1VL

Connecting the Supplied Power Cord

Plug the supplied power cord into this AC INLET.

•	Before you plug in the C-1VL, confirm that all con-
	nections have been made properly.
•	Turning on the power may cause a momentary power
	surge, which might interfere with other electrical
	equipment on the same circuit, such as computers. If
	this happens, use a wall outlet on a different circuit.

Enabling the Digital Signal Output

In the C-1VL, the digital audio output is turned off by default to get better analog audio signal quality. When connecting to digital recorder like MD recorder and performing digital recording, press the DIGITAL OUTPUT button to enable the digital audio output.

•	Do not use a power cord other than the one supplied
	with the C-1VL. The power cord supplied is designed
	for use with the C-1VL and should not be used with
	any other device.
•	Never have the power cord disconnected from the
	C-1VL while the other end is plugged into the wall
	outlet. Doing so may cause an electric shock. Always
	connect by plugging into the wall outlet last and dis-
	connect by unplugging from the wall outlet first.

AC INLET

To AC wall outlet

Turning On the C-1VL

POWER

COMPACT DISC PLAYER C-1VL

Power

Press POWER button to turn on

POWER

the C-1VL ().

■To turn off the C-1VL, press POWER button again ( ).

Tip:

In general, turning on the playing component (C- 1VL) before turning on the amplifier will lower the load to the speakers. On the other hand, when you turn off the component and amplifier, turning off the amplifier before turning off the playing component is recommended.

POWER

DIGITAL OUTPUT

COMPACT DISC PLAYER C-1VL

DIGITAL OUTPUT

Pressing the DIGITAL OUTPUT button toggles the digital audio output function between on () and off ( ).

ON: Outputs digital audio signal.

When you listen to the digital output or record the audio signal from the C- 1VL digitally on a digital recorder, enable the digital audio output.

OFF: Disable the digital audio signal output.

Turning off the digital audio signal output reduces the effect from digital signal on the analog signal circuit, pro- ducing better quality sound.

12