SDTI interface board
Digital data input/output operations using the SDTI format*1 (compressed digital interface) are enabled by installing the
*1: SDTI (serial data transport interface) complies with the SMPTE 305M standard.
The data stream format transferred via the SDTI complies with the SMPTE 321M standard.
How to use the SDTI/SDI common input signals
1. Using the signals as the SDI input signals
Select SDI using the INPUT SELECT switch on the front panel.
Select SDTI or SDI using the INPUT SELECT switch on the front panel. SDI is automatically selected according to the input signal.
2. Using the signals as the SDTI input signals
Select SDTI using the INPUT SELECT switch on the front panel.
Select SDTI or SDI using the INPUT SELECT switch on the front panel. SDI is automatically selected according to the input signal.
2-3 Selecting the time code
To select the time code of the SDTI input signal, set the TC INT/EXT switch to EXT, and select “VITC” using setup menu No. 505 (EXT TC SEL).
<Notes>
•When SDTI has been selected as the input signals, the SDTI signals are selected along with the video and audio signals.
•The video and audio signals in the SDTI input signals cannot be adjusted. The VIDEO INPUT LEVEL display is fixed at 0 dB.
•Only SDTI signals in the DVCPRO50 or DVCPRO format selected by setup menu No. 012
(SYS FORMAT) can be recorded. However, no guarantees are made either for the recording or for the EE pictures and sound when playback signals other than the regular 1⋅ playback signals have been input.
ENGLISH
113 (E)
