Panasonic AJ-D960EG manual User menu Audio Setting Description

Setup menus

USER menu <AUDIO> (continued)
		Item		Setting
							Description
	No.	Superimposed	No.		Superimposed
		display				display
	726	REC CUE	0000			CUE	This selects the input signal recorded in CUE.
			0001			CH1	0: CUE IN
			0002			CH2	1: Audio CH1 input
							2: Audio CH2 input
								ENGLISH
			0003			CH1+2
							3: Audio CH1 and CH2 MIX signal
			0004			CH3	4: Audio CH3 input
			0005			CH4	5: Audio CH4 input
			0006			CH3+4	6: Audio CH3 and CH4 MIX signal
							7: Audio CH1, CH2, CH3 and CH4 mixed signals
			0007			CH1–4
							<Note>
							The input signal is fixed at cue at all times regardless of this
							setup menu’s setting if “SDTI” has been selected by the
							INPUT SELECT switch.
	727	PB FADE	0000			AUTO	This selects the processing method for the audio edit points
			0001			CUT	(IN point, OUT point) during playback.
			0002			FADE	0: According to the status during recording.
							1: Forced CUT
							2: Forced FADE
	728	EMBEDDED	0000			OFF	This selects whether to superimpose the audio data onto the
		AUD	0001			ON	serial output.
							0: Data is not superimposed.
							1: Data is superimposed.
	729	MONITOR	0000			OFF	This makes it possible to select mixed signals for the monitor
		MIX L	0001			CH1+2	output.
			0002			CH3+4	0: No mixing.
							1: CH1 and CH2 are mixed and output to the left channel.
			0003			CH1+3
							2: CH3 and CH4 are mixed and output to the left channel.
			0004			CH2+4	3: The CH1 and CH3 signals are mixed and output to the left
							channel.
							4: The CH2 and CH4 signals are mixed and output to the left
							channel.
	730	MONITOR	0000			OFF	This makes it possible to select mixed signals for the monitor
		MIX R	0001			CH1+2	output.
			0002			CH3+4	0: No mixing.
							1: CH1 and CH2 are mixed and output to the right channel.
			0003			CH1+3
							2: CH3 and CH4 are mixed and output to the right channel.
			0004			CH2+4	3: The CH1 and CH3 signals are mixed and output to the right
							channel.
							4: The CH2 and CH4 signals are mixed and output to the right
							channel.
	731	CUE OUT	0000			OFF	This selects whether or not the cue signal is to be output to the
		SEL	0001			ON	main line output in the search mode.
							0: CUE is not output.
							1: CUE is output.
							(This applies only when setup menu No. 721 (MONI CH
							SEL) is not set to “MANU”.)
							<Notes>
							1. This function works only when a setting other than MANU has
							been selected by setup menu item No. 721 (MONI CH SEL).
							2. The main signal system output channels used for the CUE
							output differ depending on the setting selected by setup
							menu item No. 735 (MON AUTO SEL).
							When L/R is selected: CUE is output to CH1 to CH4.
							When L is selected: CUE is output to CH1 and CH3.
							When R is selected: CUE is output to CH2 and CH4.
	732	CUE SLOW	0000			STEP	For selecting the tape travel status (cue track playback status)
			0001			LINEAR	during slow-motion playback.
							0: The output picture takes precedence, and the tape travels
							at the STEP speed.
							1: The cue track playback takes precedence and the tape
							travels at the linear playback speed.
							<Notes>
							When “1” (LINEAR) has been selected:
							• Set the TC/CTL switch to the TC position because the CTL
							counter may not function properly.
							• The picture may not appear as clearly as in the STEP mode.

The underline on the setting item denotes the initial setting.

81 (E)