Panasonic AJ-D960EG manual Video

Setup menus

USER menu

<Note>

When no optional board (AJ-YA956 or AJ-YA957) has been installed, setup menus No. 610 and 611 are not displayed.

<VIDEO>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display				display
600	INT SG	0000				OFF	This selects whether to generate the internal signal.
		0001				BB	0: Signal is not generated.
	VSYNC							ENGLISH
		0001				VF	video output in order to align the video output phase with the
		0002				CB	1: The black burst is generated.
							2: 100% colour bars are generated.
601	OUT	0000				N-VF	This selects whether to float the vertical sync position of the
							input in the EE/record/edit modes.
							0: Signals are not floated.
							1: Signals are floated.
602	V-MUTE	0000			N-MUTE		Selects whether to mute the video output signals when a
	SEL	0001			LOW RF		blank on the tape has been detected during playback.
							0: No muting. (Freeze)
							1: Muting. (Set to gray.)
603	CC (F1)	0000				BLANK	This selects ON or OFF for the closed caption signal in the
	BLANK	0001				THRU	first field.
							0: Forced blanking performed.
							1: Blanking not performed.
							<Note>
							This setup menu is not displayed in the 625 mode.
604	CC (F2)	0000				BLANK	This selects ON or OFF for the closed caption signal in the
	BLANK	0001				THRU	second field.
							0: Forced blanking performed.
							1: Blanking not performed.
							<Note>
							This setup menu is not displayed in the 625 mode.
605	FREEZE	0000				FIELD	This selects the freeze mode for still pictures.
	SEL	0001				FRAME	0: Field freeze.
							1: Frame freeze.
							<Note>
							When frame freeze has been selected, the frame slow status
							is established with the slow setting.
606	OUT C	0000				B/W	This selects chroma colour killer processing for the video
	KILL	0001			COLOR		output signals.
							0: The signals are forcibly processed as B/W signals.
							1: The signals are automatically processed.
609	EDH	0000				OFF	This selects whether to superimpose EDH onto the serial
		0001				ON	output signals.
							0: EDH is not superimposed.
							1: EDH is superimposed.
610	Pb/Pr	0000				MII	This selects the component input signal level.
	IN LV	0001				B-CAM	0: MII level.
							1: ß cam level.
							<Note>
							This setup menu is not displayed in the 625 mode.
611	INPUT	0000				B/W	This selects colour killer processing for the video input signals.
	C KILL	0001				AUTO	0: The signals are forcibly processed as B/W signals.
							1: The signals are automatically processed.
614	Pb/Pr OUT	0000				MII	This selects the analogue component output level.
	LV	0001				B-CAM	0: MII level
							1: ß-CAM level
							<Note>
							This setup menu is not displayed in the 625 mode.

The underline on the setting item denotes the initial setting.

77 (E)