Controls and their functions
<Connector area>
qAC IN connector
This is for connecting the unit to the power outlet using the power cord provided.
wSIGNAL GND terminal
This terminal is connected to the signal ground terminal of the connected unit in order to reduce noise. It is not connected to ground for safety purposes.
eFuse holder
This contains a fuse.
rFan motor
This is for cooling the unit.
The W lamp lights when trouble has caused the fan motor to stop. If the unit is still operated in the warning status, the temperature inside the deck will rise, and when it exceeds the safety temperature, all the unit’s operations will be shut down.
tTIME CODE IN connector
This is the connector for recording the external time code on the tape.
yTIME CODE OUT connector
The playback time code is output from this connector during playback.
During recording, the time code generated by the internal time code generator is output.
uCUE IN connector
The analogue signal to be recorded on the CUE track is supplied to this connector. The audio signals from a microphone can also be recorded by selecting the
iCUE OUT connector
The analogue signal recorded on the CUE track is output from this connector.
oMONITOR OUT connector
During playback, the playback signals from the CUE track or PCM audio signal CH1/CH2/ CH3/CH4 are output from this connector.
!0ANALOG AUDIO IN connectors
These are the analogue audio input connectors.
!1ANALOG AUDIO OUT connectors
The analogue audio signals are output from these connectors.
!2ANALOG COMPONENT VIDEO IN connector (option)
The analogue component video signal is supplied to this connector.
!3ANALOG COMPOSITE VIDEO IN connectors and 75Ω termination switch (option) The analogue composite video signal is supplied to these two connectors which are connected in a
!4REF VIDEO IN connectors and 75Ω termination switch
These are the input connectors for the reference video signals. Supply signals with colour burst. When the termination is required, set the switch to ON.
18 (E)
