Panasonic AJ-D960EG manual System menu, Setting Description

Setup (setting) menus

SYSTEM menu

<SYSTEM>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display				display
00	WFM SEL	0000			CTL		This selects the signal to output from the VIDEO OUT 2
		0001			TC		connector.
									ENGLISH
		0005			ENV		0: The CTL signal is output.
		0002			VIDEO
		0003			SYNC		1: The TIME CODE signal is output.
		0004			RF		2: The VIDEO OUT signal is output.
							3: The SYNC signal is output.
							4: The PB L1R 3ch RF signal is output.
							5: The PB L1R 3ch ENV signal is output.
							<Notes>
							1. The settings can be changed at any time regardless of the
							setup menu item No. 30 (MENU LOCK) setting.
							2. During normal playback, the output signals have levels
							which are virtually identical to the values given below under
							a 75Ω termination.
							CTL: 0.1 to 0.3 Vp-p	TC: 0.6 Vp-p
							VIDEO: 1.0 Vp-p	SYNC: 0.25 Vp-p
10	ENCODER	0000			REMOTE		This selects whether the video output signal is to be adjusted
	SEL	0001			LOCAL		on the VTR or with the external encoder remote control.
							0: Video output signals are adjusted with the external encoder
							remote control.
							1: Video output signals are adjusted on the VTR.
11	SYS SC	0000			–127		System phase adjustment: Total variable range: ±180° or more
		.		.
		.		.			–: Advanced
		.		.
		0127				0	+: Delayed
		.			.
		.		.			<Note>
		.		.
		0255		128			If setting operation is performed, the setting value does not
							return to factory (default) setting.
12	SYS H	0000			–108		System phase adjustment: 74 ns steps
		.		.
		.		.			–: Advanced
		.		.
		0108				0	+: Delayed
		.			.
		.		.			<Note>
		.		.
		0216		108			If setting operation is performed, the setting value does not
							return to factory (default) setting.
13	VIDEO	0000			–32		Video phase adjustment: 148 ns steps
		.		.
	PHASE	.		.			–: Advanced
		.		.
		0032				0	+: Delayed
		.			.
		.		.
		.		.
		0064		32
14	SCH	0000				0	SCH phase adjustment: 90° units
	COARSE	0001			90		–: Advanced
		0002		180			+: Delayed
		0003		270			(The S and C phases change but the H phase does not
							change.)
15	SCH FINE	0000			–32		SCH phase adjustment: Total variable range: ±45° or more
		.		.
		.		.			–: Advanced
		.		.
		0032				0	+: Delayed
		.			.
		.		.			(The S and C phases change but the H phase does not change.)
		.		.
		0064		32
16	AV PHASE	0000			–100		This adjusts the audio output phase with respect to the video
		.		.
		.		.			output: 20.8 ∝s steps
		.		.
		0100				0	–: The audio output phase is advanced with respect to the
		.			.
		.		.			video output.
		.		.
		0200		100			+: The audio output phase is delayed with respect to the video
							output.

The underline on the setting item denotes the initial setting.

59 (E)