Panasonic AJ-D960EG manual Blank Setting Description, Y4BPF, REC LINE3, REC LINE4

Setup menus

USER menu

•Number of lines which can be set for TELETEXT

When 50 Mbps is the recording/ playback format.

ADD LINE	Number of lines
	which can
50
		be set
setting value
	525 mode		625 mode
YC422
Y4_B/W	10		15
Y4_BPF
C4

<V BLANK> (continued)

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display			display
801	ADD LINE	0000			OFF	For selecting the mode for recording signals on additional
	50	0001			YC422	lines.
		002			Y4_B/W	0: No signals are recorded on additional lines.
		0003			Y4_BPF	1: The 422 mode signals are recorded on 2 lines.
						2: Only the Y signal is recorded on 4 lines directly.
		0004			C4
						3: Only the Y signal is recorded on 4 lines after it has been
						separated from the C signal.
						4: Only the C signal is recorded on 4 lines.
						<Notes>
						• When a setting from “1” to “4” is selected and the STOP
						button is pressed, operation transfers to the sub-screen, and
						the recording lines can be selected. To return from the sub-
						screen, press the STOP button again.
						• The setting takes effect when the system format is 50 Mbps.
Sub-screen (625 mode)
00	REC LINE1	0000			7L	For selecting the additional line where the signals are to be
		.		.
		.		.		recorded.
		.		.
		0015			22L
		0016			320L
		.		.
		.		.
		.		.
		0031			335L
		0032			623L
01	REC LINE2	0000			7L	For selecting the additional line where the signals are to be
		.		.
		.		.		recorded.
		.		.
		0015			22L
		0016			320L
		.		.
		.		.
		.		.
		0018			322L
		.			.
		.		.
		.		.
		0031			335L
		0032			623L
02	REC LINE3	0000			7L	For selecting the additional line where the signals are to be
		.		.
		.		.		recorded.
		.		.
		0003			10L	<Note>
		.			.
		.		.		This menu item is not displayed when setting “1” has been
		.		.
		0015			22L	selected as the additional line mode.
		0016			320L
		.		.
		.		.
		.		.
		0031			335L
		0032			623L
03	REC LINE4	0000			7L	For selecting the additional line where the signals are to be
		.		.
		.		.		recorded.
		.		.
		0015			22L	<Note>
		0016			320L	This menu item is not displayed when setting “1” has been
		.		.
		.		.		selected as the additional line mode.
		.		.
		0019			323L
		.			.
		.		.
		.		.
		0031			335L
		0032			623L

The underline on the setting item denotes the initial setting.

84 (E)