Panasonic AJ-D960EG manual Table of Auto OFF Error messages, Restart condition, Power OFF→ON

Table of AUTO OFF Error messages

Counter display	Monitor display	Description	VTR operation
			(Restart condition)
CAP ROTATE TOO	CAP ROTA TOO	If the capstan motor speed is abnormally low, the	STOP
SLOW	SLOW	AUTO OFF lamp lights, and the message display
			(POWER OFF→ON)
		flashes.
CAP TENSION ERROR	CAP TENSION ERROR	If an abnormal tension at the supply side is detected	STOP
		in the capstan mode, the AUTO OFF lamp lights, and
		the message display flashes.	(POWER OFF→ON)
DEW	DEW	If condensation is detected, the AUTO OFF lamp
		lights, the message display flashes, and the VTR is
		transferred to the eject mode. After the tape is
		ejected, the drum rotates in order to eliminate the
		condensation.	EJECT
		When the condensation has been eliminated, the	(Normal operation
		AUTO OFF lamp and message display go off, and the	resumed after
		VTR can be used.	condensation is
		<Notes>
			eliminated)
		1) If condensation is detected in the eject mode, the
		drum starts rotating as soon as it is detected.
		2) If condensation is detected when the cassette has
		been inserted, the drum rotation is stopped, and
		after the tape is ejected, the drum starts rotating.
DRUM ROTATE TOO	DRUM ROTA TOO	If the cylinder motor speed is abnormally high, the	STOP
FAST	FAST	AUTO OFF lamp lights, and the message display	(POWER OFF→ON)
		flashes.
DRUM ROTATE TOO	DRUM ROTA TOO	If the cylinder motor speed is abnormally low, the	STOP
SLOW	SLOW	AUTO OFF lamp lights, and the message display	(POWER OFF→ON)
		flashes.
DRUM TORQUE	DRUM TORQUE	When it has been detected that the cylinder motor is	STOP
ERROR	ERROR	subject to an abnormal torque, the AUTO OFF lamp	(POWER OFF→ON)
		lights, and the message display flashes.
E-FF	E-FF	If the tape start and tape end are detected simulta-	STOP
		neously either during or after loading, the AUTO OFF	(POWER OFF→ON)
		lamp lights, and the message display flashes.
FRONT LOAD ERROR	FRONT LOAD ERROR	The AUTO OFF lamp lights and the message display
		flashes when the take-up reel has been rotating idly	STOP
		for a fixed period of time while the start/end	(POWER OFF→ON)
		processing operation during loading (half position) is
		being performed.
FRONT LOAD MOTOR	FRONT LOAD MOTOR	If the cassette does not move up even when 6
		seconds have elapsed since the VTR was transferred
		to the eject mode, the AUTO OFF lamp lights, and the
		message display flashes.	STOP
		<Note>
			(POWER OFF→ON)
		If the cassette does not move down inside the
		machine even when 6 seconds have elapsed since
		the cassette was inserted, the VTR is transferred to
		the eject mode.
LOADING MOTOR	LOADING MOTOR	When the unloading operation is not completed within
		6 seconds, the AUTO OFF lamp lights, and the
		message display flashes.	STOP
		<Note>
			(POWER OFF→ON)
		When the loading operation is not completed within 6
		seconds, the VTR is transferred to the eject (unload-
		ing) mode.

104 (E)