Panasonic AJ-D960EG manual Voice-over facility internal, Operating procedure

Voice-over facility (internal)

Operating procedure 1

MIC

AMP

Microphone

ANALOGUE	VIDEO
AUDIO
	OUT
IN*

* Connect to the channel whose	AJ-D960
sound is to be recorded.

TV monitor

ENGLISH

1		Select INT_VO as the setup menu No. 317 (AUD MEM MODE) setting.
2		Select the same setting for the channel (any channel from CH1 to CH4) on which the
		sound is to be recorded and for the setup menu No. 318 (AUD MEM CH) channel.
3		Insert the cassette tape for which the voice-over editing is to be performed.
4		Press the insert button for the channel (channel selected in step 2) on which the sound
		is to be recorded and ensure that its lamp lights.
5		Press the PLAY button.
6		Search the position (IN point) where voice-over editing is to start while watching the TV
		monitor.
7		Press the IN and SET buttons simultaneously at the IN point.
8		Input the audio signals to be recorded to the channel which was selected in step 2.
9	Search the position (OUT point) where voice-over editing is to end while watching the
		TV monitor.
10	Press the OUT and SET buttons simultaneously at the OUT point. The audio signals to
		be recorded are stored in the memory.
	11	Press the STOP button.
12	Press the AUTO EDIT button to proceed with editing. The audio signals stored in the
		memory are recorded from the memory onto the cassette tape.

<Note>

The audio signals can be previewed prior to editing by pressing the PREVIEW button while the SET button is held down before the AUTO EDIT button is pressed.

43 (E)