Chapter 5
Jumper and Connector Information
Before setting jumpers
Use the mainboard jumpers to set system configuration options. Jumpers with more than one pin are numbered. When settting the jumpers, ensure that the jumper caps are placed on the correct pins.
Illustration | Description |
| The illustrations below show a |
| jumper cap is placed on both pins, the jumper is SHORT. |
| If you remove the jumper cap, or place the jumper cap on |
| just one pin, the jumper is OPEN. |
ShortOpen
This illustration shows a
SHORT.
1 2 3
Chapter 5 | 76 |
