Aspire Digital T130 manual Setup, Non-OS2

Parameter	Description	Options
Typematic Rate	After Typematic Rate Setting is enabled, this item allows you	Settings:
(Chars/sec)	to set rate (characters/second) at which at keys are	6,8,10,12,15,20,24 and
	accelerated.	30
Typematic	This item allows you to select the delay between when the	Settings:
Delay	key was first pressed and when the acceleration begins.	250,500,750 and 1000
Security Option	If you have installed password protection, this item defines if	Setup
	the password is required at system start up, or if it is only	System
	required when a user tries to enter the Setup Utility.
APIC Mode	This items allows you to enable APIC (Advanced	Enabled
	Programmable Interrupt Controller) functionality. APIC is an	Disabled
	Intel chip that provides symmetic multiprocessing (SMP) for
	its Pentium systems.
OS Select For	This item is only required if you have installed more than	Non-OS2
DRAM > 64MB	64MB of memory and you are running the OS/2 operating	OS2
	system. Otherwise, leave this item at the default.
HDD S.M.A.R.T	The S.M.A.R.T (Self-Monitoring, Analysis, and Reporting	Disabled
Capability	Technology) system is a diagnostics technology that monitors	Enabled
	and predicts device performance. S.M.A.R.T software resides
	on both the disk drive and the host computer.
	The disk drive software monitors the internal performance of
	the motors, media, heads, and electronics of the drive. The
	host software monitors the overall reliability status of the
	drive. If a device failure is predicated, the host software,
	through the Client WORKS S.M.A.R.Tapplet, warns the user
	of the impending condition and advise appropriate action to
	protect the data.
Video BIOS	This function, when enabled allows VGA BIOS to be copied to	Disabled
Shadow	the system DRAM for enhanced performance.	Enabled

27 Chapter 2