Pioneer PDP-436RXE manual Using Hdmi Input, Connecting Hdmi equipment

10Enjoying through External Equipment

Using HDMI Input

The INPUT 3 terminals include HDMI terminals to which digital video and audio signals can be input. To use the HDMI terminal, activate the terminal and specify the types of video and audio signals to be received from the connected equipment. For the types of these signals, see the operation manual that came with the connected equipment.

Before starting the menu, press INPUT 3 on the remote control unit or press INPUT on the Plasma Display to select INPUT 3.

Input signal correlation table

1920∗1080i@50Hz

720∗576p@50Hz

1280∗720p@50Hz

720(1440)∗576i@50Hz

1920∗1080i@59.94/60Hz

720∗480p@59.94/60Hz

1280∗720p@59.94/60Hz

720(1440)∗480i@59.94/60Hz

1920∗1080p@24Hz

For audio, the system supports the following:

•Linear PCM (STEREO 2ch)

•Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Connecting HDMI equipment

(rear view)

INPUT 1

AC IN

	HDMI cable
	(commercially
SCART cable	available.)

(commercially available.) Connect the SCART cable only

when inputting analogue audio signals.

HDMI equipment

To activate the HDMI terminal:

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “HDMI Input” (/ then ENTER).

4Select “Setting” (/ then ENTER).

5Select “Enable” (/ then ENTER).

38

Item	Description
Disable	Deactivates the HDMI terminal.
(factory default)
Enable	Activates the HDMI terminal.

6Press HOME MENU to exit the menu.

To specify the type of digital video signals:

1Repeat steps 1 to 3 provided for “To activate the HDMI terminal”.

2Select “Video” (/ then ENTER).

3Select the type of digital video signals (/ then ENTER).

•If you select “Auto”, an attempt will be made to identify the type of digital video signals when digital video signals are received.

Item	Description
Auto	Automatically identifies input digital video
(factory default)	signals.
Colour-1	Digital Component Video signals (4:2:2) locked
Colour-2	Digital Component Video signals (4:4:4) locked
Colour-3	Digital RGB signals locked

4Press HOME MENU to exit the menu.

NOTE

•If you select a parameter other than “Auto”, make such a setting that results in natural colour.

•If no image appears, specify another digital video signal type.

•For the digital video signal types to be specified, check the operation manual that came with the connected equipment.

To specify the type of audio signals:

1Repeat steps 1 to 3 provided for “To activate the HDMI terminal”.

2Select “Audio” (/ then ENTER).

3Select the type of audio signals (/ then ENTER).

•If you select “Auto”, an attempt will be made to identify the type of audio signals when audio signals are received.

Item	Description
Auto	Automatically identifies input audio signals.
(factory default)
Digital	Accepts digital audio signals.
Analogue	Accepts analogue audio signals.

4Press HOME MENU to exit the menu.

NOTE

•If no sound is output, specify another audio signal type.

•For the audio signal types to be specified, check the operation manual that came with the connected equipment.

•Depending on the equipment to be connected, you also need to connect analogue audio cables.

En