Advantech INTRAC-305 user manual Show Alarms, More

OPERATION INTRAC-305

SHOW ALARMS

Alarm Code		Function
00 00 00 00 00 00 00 00		Standby
00 00 00 00 00 00 00 00
		Home
Beacon Alarm	(SEC)	Update
Hardware Fault	(SEC)	Alarms
Servo Alarm
Az Soft Limit		Clear
El Soft Limit	(SEC)	Alarms
Unable to Predict
Polar Soft Limit CW		(Previous
Polar Soft Limit CCW
Emergency Stop		Page)
Model Expire
Remote Jog Time-out		Next
>More<
		page

1

2

3

4

5

6

puts the antenna control system into STANDBY mode and skips to the HOME menu

skips to the Home (root) menu

updates the Show Alarms display

attempts to reset all latched alarms and clears Alarms display

shows the previous page of alarms (if there is more than one page)

shows the next page of alarms (if there is more than one page)

Path	HOME - SHOW ALARMS (Menu Key 5)
Description	This screen shows all the currently active alarms, both
	primary and secondary. If there are more alarms active than
	can be displayed on one page “MORE” is appears at the
	bottom of the screen. Menu Keys 5 & 6 can then be used to
	move through the pages of alarms. If there is only one page
	of alarms Menu Keys 5 & 6 are not labelled.
	Primary alarms will cause the System Alarm indicator to
	illuminate drawing attention to the fact that an alarm has
	become active. Secondary alarms do no illuminate the
	indicator but will still be displayed on the alarms screen even
	if there are no primary alarms.
Note	The alarm conditions do not update automatically whilst being
	displayed. To check if an alarm state has changed press
	Menu Key 4 (Clear Alarms) to clear the display. Follow this
	by pressing Menu Key 3 (Update Alarms) to display the
	current alarm state.

Page 46 INTRAC-305 MANUAL - Issue 3.2 ©2011 Advantech Wireless