Advantech INTRAC-305 user manual Operation, Fitted Options

INTRAC-305

FITTED OPTIONS

3

OPERATION

						Function
Current Mode				Tracking		Standby
Control State				Local
Beac Freq				11.452000 GHz
Beac Level				-10.05	dB
El	Angle			25.37		Home
Az	Angle			210.50
Pol	Angle			27.4
Beacon
		Receiver: Fitted
Beac pol select: Not Fitted						Fitted/
Polarization				: Fitted
Mount			Az/El : Fitted			Not
Type HrAng/Dcl: Not Fitted
						Recall
Resolver x2				: Fitted
						Existing
Type			x1	: Not Fitted		Settings
Extended Az				: Not Fitted
						Next
Geared Pol				: Not Fitted
SimAx Drive				: Fitted		Field
Inv Beacon Lock: Not Fitted
Press EN to accept all fields

1

2

3

4

5

6

puts the antenna control system into STANDBY mode and skips to the HOME menu

skips to the Home (root) menu

(not used)

toggles the highlighted parameter between Fitted/Not Fitted

resets the menu to display the currently stored values

moves the highlight box to the next field in the current menu

Path	HOME - FUNCTION - SYSTEM SETUP -
	MENU KEY 6 (x6) - ENTER
or	From Models or Configuration
	SYSTEM SETUP - MENU KEY 6 (x6) - ENTER
Description	Various options such as polarisation drive and simultaneous
	axis drive are available on the INTRAC-305. Their use has to
	be programmed into the INTRAC in order for them to be
	usable. That programming is carried out in this menu.
	The various options are shown on this screen.
	Menu Key 6 (Next Field) steps the highlighted edit line
	through the options.
	Menu Key 4 (Fitted/Not) toggles the option between fitted and
	not fitted.
	Menu Key 5 (Recall Existing Settings) resets the options to
	the state they were in when this menu was entered.
	Pressing ENTER accepts the displayed settings.
Note	Beacon Pol Select, Extended Az, Geared Pol, and Inv
	Beacon Lock should be set to “Not Fitted”.
	SimAx Drive should be set to “Fitted”.
	Normally, when replacing an APC300, the correct resolver
	type will be x2.

© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 37