3
| OPERATION |
STOW SETUP
Current Mode | Tracking |
| ||
Control State | Local |
| ||
Beac Freq | 11.452000 GHz | |||
Beac Level |
| dB | ||
El | Angle | 25.37o |
| |
Az | Angle | 210.50o |
| |
Pol | Angle | 27.4 | o |
|
Final Stow Positions:
Az | angle | 180.000o |
El | angle | 90.000o |
Preliminary Stow Positions: Az angle 160.000o El angle - 0.500o
Press EN to accept settings
Function
Standby
Home
Select
Stow
Use
Stow/
Unstow
Next
Field
1 |
2 |
3 |
4 |
5 |
6 |
puts the antenna control system into STANDBY mode and skips to the HOME menu
skips to the Home (root) menu
moves to the Select Stow Use menu
Stows (or Unstows) the antenna
(not used)
moves the highlight box to the next field in the current menu
Path | HOME - FUNCTION - SYSTEM SETUP - |
| MENU KEY 6 (x5) - ENTER |
or | From Models or Configuration |
| SYSTEM SETUP - MENU KEY 6 (x5) - ENTER |
Description | This menu is used to set the |
| and final antenna stow positions. |
| With the antenna not in the Stow position pressing the |
| Stow/Unstow key causes the antenna to be driven to the Final |
| Stow Position via the Preliminary Stow Position. |
Note | The Preliminary and/or Final positions may be set to “used” or |
| “not used” in the “Select Stow Use” menu (Menu Key 3). (see |
| next page) |
| Menu key 6 (Next Field) steps the edit box through the four |
| angle fields. The |
| Numeric Keypad. |
Notes | If all positions are enabled the antenna is driven, in both axes, |
| to the Preliminary Stow Position. When both axes reach that |
| position the antenna is driven to the Final Stow Position |
| Unstow drives the antenna to the Preliminary Stow Position. |
| The only antenna command possible from the Stow Position |
| is Unstow. |
© 2011 Advantech Wireless | Page 35 |