Advantech INTRAC-305 8, 8. WARRANTY & REPAIR

8. WARRANTY & REPAIR

WARRANTY Advantech AMT Limited warrants the INTRAC-305 Antenna

Control Unit, the (optional) IBR-L integral L-band beacon

receiver and other associated products designed,

manufactured and supplied by Advantech AMT Limited for a

period of 365 days from the date of delivery.

The liability of Advantech AMT Limited under this warranty

shall be limited to repair or replacement of defective units or

parts thereof, at Advantech’s option, which are returned,

carriage and insurance paid, to Advantech AMT Limited, 39

Edison Road, St.Ives, Cambridgeshire, PE27 3LF, England.

The returned unit(s) must be accompanied by a document

declaring that the equipment is returned for repair under

warranty and describing clearly and fully the reason for the

return of the unit.

Subject to the unit being eligible for warranty repair

Advantech AMT Limited will effect the repair and return the

unit by pre-paid shipment to the originating location. Subject

to the shipment charges being the same as, or less than, that

to the original location the unit may be shipped to some other

location as the customer may specify.

Under no circumstances shall Advantech AMT Limited be

liable for any consequential or incidental costs or damage.

Exclusions This warranty does not apply to any equipment which has

been damaged through abuse, accident (such as lightning

strike), negligence or failure to comply with Advantech AMT

Ltd instructions for storage, installation and use as contained

in the equipment manual(s).

Except as specifically provided above Advantech AMT

Limited makes no warranties, expressed or implied, as to the

merchantability or fitness for a particular purpose.

REPAIR SERVICE Advantech AMT Limited will provide a repair service for all

equipment manufactured by Advantech AMT Limited for a

period of ten (10) years.

Returning equipment for repair Prior to the return of any equipment for repair, whether under

warranty or by payment, Advantech AMT Limited must be

contacted. The purpose of this contact is to discuss the

problem and confirm that equipment needs to be returned.

Also to agree the most effective solution to the problem and

to discuss the method of return in order to avoid unnecessary

duties and ensure that the packing is adequate to protect the

equipment during shipment.

The cost of returning the equipment to Advantech AMT

Limited will be paid by the customer.

Repairs not under warranty Repairs to equipment not under warranty will be paid for by

the customer. On receipt of the defective unit Advantech