Advantech INTRAC-305

OPERATION INTRAC-305

RESERVE MODEL

puts the antenna control system into

STANDBY mode and skips to the HOME

skips to the Models menu

skips to the Config menu

skips to the System Setup menu

Current Mode Tracking

Control State Local

Beac Freq 11.452000 GHz

Beac Level -10.05 dB

El Angle 25.37o

Az Angle 210.50o

Pol Angle 27.4 o

Standby

Home

Config

System

Setup

Function

Press EN to accept selection

>IESS-412 SET <

NORAD NOT SET

skips to the Home (root) menu

Models

Field moves the highlight box to the next field

in the current menu

Path HOME - FUNCTION - MODELS -

MENU KEY 6 (x2) - ENTER

or From Configuration or System Setup

MODELS - MENU KEY 6 (x2) - ENTER

Description Once the INTRAC-305 has built an orbit model it can track

the satellite with no tracking signal for 72hrs. After this time if

there is still no signal the INTRAC deems the model to be

expired and ceases to track.

In such a situation the INTRAC can fall back into Program

Track mode using the “Reserve Model”.

The “Reserve Model” requires that valid IESS-412 or NORAD

data be loaded and that the required reserve model is

selected.

In this menu the required reserve model, IESS-412 or

NORAD is set.

Menu Key 6 (Next Field) steps through the two selections.

Pressing ENTER accepts the highlighted selection.

Note The words SET and NOT SET following IESS-412 and

NORAD refer to the previous selection. Pressing ENTER will

make the highlighted selection SET and the other NOT SET

regardless of the current displayed state.