Advantech INTRAC-305 user manual Edit Satellite Table, Home Function Menu KEY 6 X2 Enter

3

INTRAC-305 OPERATION

EDIT SATELLITE TABLE

Current Mode			Tracking
Control State			Local
Beac Freq			11.452000 GHz
Beac Level		-10.05				dB
El	Angle		25.37o
Az	Angle	210.50o
Pol	Angle		27.4	o
Satellite Number
					01
Elevation					33.74o
Azimuth			162.83o
Polarization			- 90.0o
Band			1
Frequency			950.000000 MHz

Press EN to accept selection

Function

Standby

Home

Models

Config

System

Setup

Next

Field

1

2

3

4

5

6

puts the antenna control system into STANDBY mode and skips to the HOME menu

skips to the Home (root) menu

skips to the Models menu

skips to the Config menu

skips to the System Setup menu

moves the highlight box to the next field in the current menu

Path	HOME - FUNCTION - MENU KEY 6 (X2) - ENTER
or	From Models or System Setup:-
	CONFIG - MENU KEY 6 (X2) - ENTER
Description	The INTRAC-305 can store bearing parameters for 40
	satellites.
	This function allows the editing of previously stored data
	and/or the addition of new data.
	Menu Key 6 steps the edit box through the six fields. Using
	the numeric keypad enter the satellite’s parameters and the
	number it is to be stored under.
	Pressing ENTER sets the new values.
Note 1	The Satellite Number must be between 1 and 40 inclusive.
Note 2	If the frequency is between 12.55GHZ and 12.75GHZ ensure
	that the correct band number is set for the down converter
	frequency, i.e., band 6 or band 7.
	(see previous page - Beacon Frequency)
	To view the data relating to a satellite number use the Goto
	Satellite menu, page 22.

© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 23