OPERATION |
|
AUTO NEW MODEL
Current Mode
Beac Level
Beac Freq
El Angle
Az Angle
Pol Angle
Local
New Mode
Standby
Home
Manual /Stow
Goto
Auto Continue
Auto
New
Model
1 |
2 |
3 |
4 |
5 |
6 |
puts the antenna control system into STANDBY mode and skips to the HOME menu
skips to the Home (root) menu
moves to the Manual/Stow menu
moves to the 1st ‘Goto’ menu ie Goto Position
resumes tracking using the INTRAC’S current model
clears the INTRAC’S current model and starts learning a new model
Path | HOME - NEW MODE - MENU KEY 6 |
Description | This facility does not have a screen of its own. It is a function |
| enabled by a menu key on the New Mode menu. |
| Auto New Model is used when it is required to track a new |
| satellite. It causes the INTRAC to clear the existing model (if |
| there is one) and start to build a new model of the orbit of the |
| satellite whose beacon signal it is receiving. |
| Thus before pressing the Auto New Model key the antenna |
| must be peaked on the required satellite’s main transmission |
| lobe. The peaking may be done in manual mode or |
| automatically using Search Mode. |
| On pressing Auto New Model the INTRAC will enter Learning |
| mode. After 24hrs of learning the orbit and building the model |
| the INTRAC will enter Tracking mode. |
Page 20 | ©2011 Advantech Wireless |
