11.2.Using a 3/8” socket, remove the shaft retainer cover. See Figure 25.
Shaft Retainer Cover
Figure 25
11.3.Remove the ball bearing and flat washer.
11.4.Using snap ring pliers, remove the retaining ring. See Figure 26.
Retaining Ring
Figure 26
11.5. Remove the three flat washer shims.
11.6. Remove the planetary ring gear. See Figure 27.
Planetary Ring Gear
Figure 27
11.7.You can now remove and service the inner plan- etary gears.
NOTE: The procedure can be performed for either planetary gear cluster.
12.DRIVE SHAFT REMOVAL
NOTE: It is not necessary to remove any belts to service the Drive shaft.
12.1.Remove both planetary gear clusters as covered in REMOVAL OF THE PLANETARY GEAR sec- tion.
12.2.Lift up on the right side of the drive shaft to allow removal of the right chain. See Figure 28.
Drive Shaft
Figure 28
9