31AS2B5-711 Snow Thrower

31AS2B5-711

Yard-Man Version

Snow Thrower Model Number #31AS2B5- 711 Serial Number 1E074B20005

NOTE: The equipment that was used to write this section was a prototype and was without labels. There may be subtle differences between prototypes and production equipment but the disassembly procedures preformed will remain the same.

GENERAL INFORMATION

Tecumseh Engine HSSK 50 designated as a (C) engine with 125 hours life expectancy. Oil recommendation is 5W30 - Sump capacity is 21 ounces

This is a four-cycle, horizontal crankshaft, air-cooled engine equipped with a 120 V A.C. operated electric starter.

NOTE: Refer to the engine manual for start and stop and maintenance procedures.

1.CONTROLS

The auger control bail and the pull start handle are mounted on the main handle for easy accessibility. The pull rope and mitten-grip handle is secured to the right handle with a bracket to keep the cord away from other items and allow for direct and easy in line pull. See Figure 1.

Control Bail

Pull Start

Figure 1

2.AUGER

The auger assembly is also easily accessible for maintenance and periodical replacement of the rubber flails on the auger assemblies. See Figure 2.

Rubber Flails

Figure 2

3.A/C STARTER

From the rear there is easy access to the start/stop

1