9.4.Remove and inspect the bearing and heavy washer for ear or damage. See Figure 15.

Bearing and Washer

9.6.Inspect the auger assembly for wear on the rub- ber flails. Check the shaft for straitness. Check the welds for cracks or breaks. See Figure 17.

Figure 15

9.5.Facing the housing, slide the auger assembly to the right, and then remove the auger and shaft assembly from the housing. See Figure 16.

Slide auger assembly to the right

Figure 16

Figure 17

10.SPARK PLUG ACCESS

Access to the spark-plug is through an access hole on top of the main housing next to the oil fill tube. See Figure 18.

Access Hole

Spark Plug

Figure 18

5