SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol—heed its warning.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

California Proposition 65 Warning: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

General Operation

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, wire, bones, toys, and other foreign objects which could be picked up and thrown by the blade(s). Thrown objects can cause serious personal injury.

7.Plan your mowing pattern to avoid discharge of material toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator.

8.Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

9.Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Loose fitting clothes and jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals.

10.Be aware of the mower and attachment discharge direction and do not point it at anyone. Do not operate the mower without the discharge cover or entire grass catcher in its proper place.

11.Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade(s) can amputate hands and feet.

12.A missing or damaged discharge cover can cause blade contact or thrown object injuries.

13.Stop the blade(s) when crossing gravel drives, walks, or roads and while not cutting grass.

14.Watch for traffic when operating near or crossing roadways. This machine is not intended for use on any public roadway.

15.Do not operate the machine while under the influence of alcohol or drugs.

16.Mow only in daylight or good artificial light.

17.Never carry passengers.

18.Disengage blade(s) before shifting into reverse. Back up slowly. Always look down and behind before and while backing to avoid a back-over accident.

19.Slow down before turning. Operate the machine smoothly. Avoid erratic operation and excessive speed.

20.Disengage blade(s), set parking brake, stop engine and wait until the blade(s) come to a complete stop before removing grass catcher, emptying grass, unclogging chute, removing any grass or debris, or making any adjustments.

21.Never leave a running machine unattended. Always turn off blade(s), place transmission in neutral, set parking brake, stop engine and remove key before dismounting.

22.Use extra care when loading or unloading the machine into a trailer or truck. This unit should not be driven up or down ramp(s), because the unit could tip over, causing serious personal injury. The unit must be pushed manually on ramp(s) to load or unload properly.

23.Muffler and engine become hot and can cause a burn. Do not touch.

24.Check overhead clearances carefully before driving under low hanging tree branches, wires, door openings etc., where the operator may be struck or pulled from the unit, which could result in serious injury.

25.Disengage all attachment clutches, depress the brake pedal completely and shift into neutral before attempting to start engine.

26.Your machine is designed to cut normal residential grass of a height no more than 10”. Do not attempt to mow through unusually tall, dry grass (e.g., pasture) or piles of dry leaves. Dry grass or leaves may contact the engine exhaust and/or build up on the mower deck presenting a potential fire hazard.

3

Page 3
Image 3
MTD 604H manual Important Safe Operation Practices, General Operation

604H specifications

The MTD 604H is an advanced lawn mower designed for tackling various landscaping tasks with efficiency and precision. This powerful machine stands out in the market due to its robust set of features and cutting-edge technologies that cater to both professional landscapers and homeowners.

One of the main features of the MTD 604H is its high-performance engine. The mower is equipped with a dependable gas engine that offers superior torque and power, making it suitable for mowing large areas quickly. The engine's design emphasizes fuel efficiency, which allows users to cover more ground while minimizing fuel consumption.

Another significant characteristic of the MTD 604H is its innovative cutting deck. The mower features a wide cutting deck that can range from 36 to 42 inches, allowing for a larger clipping area. This design reduces mowing time and ensures a clean, even cut regardless of the terrain. Furthermore, the cutting height can be easily adjusted, enabling users to choose the perfect length for their grass type and seasonal conditions.

The MTD 604H also incorporates several user-friendly technologies. For instance, it has a self-propelled system that makes maneuvering easier on various terrains, such as slopes and uneven surfaces. This feature significantly reduces operator fatigue, allowing users to work longer without discomfort.

Additionally, the mower has a plush, ergonomic seat designed to provide comfort during extended use. It comes with easy-to-reach control panels that allow users to operate the mower’s functions without difficulty. The inclusion of a mulch kit further enhances its versatility, allowing users to recycle grass clippings back into the lawn instead of bagging them.

Safety is a crucial aspect of the MTD 604H. The mower is equipped with automatic blade brakes that stop the blades almost instantly when the user releases the control lever. This feature significantly reduces the risk of accidents and enhances user safety while operating the machine.

In conclusion, the MTD 604H is a feature-packed lawn mower characterized by its powerful engine, wide cutting deck, user-friendly technologies, and safety features. Whether for home use or professional landscaping services, the MTD 604H emerges as a reliable, efficient, and versatile choice for maintaining a pristine lawn.