Assembling Your Snow Thrower, Unpacking, Crate, Box

SECTION 3: ASSEMBLING YOUR SNOW THROWER

NOTE: References to right or left side of the snow thrower are determined from behind the unit in the operating position. The “operator’s position” is defined as standing directly behind the snow thrower, facing the handle panel.

NOTE: This Operator’s Manual covers several models. Snow thrower features vary by model. Not all features discussed in this manual are applicable to all snow thrower models.

Unpacking

Crate

•Remove screws from the top sides and ends of the shipping crate.

•Set panel aside to avoid tire punctures or personal injury.

•Remove and discard plastic bag that covers unit.

•Remove any loose parts included with unit (i.e., Operator’s Manual, etc).

•Roll unit out of crate.

Box

•Remove staples or break glue on top flaps of the carton. Remove any loose parts included with unit (i.e., operator’s manual, etc.).

•Cut corners of the carton and lay ends down flat. Remove packing material.

•Roll unit out of carton. Check carton thoroughly for loose parts before discarding.

Loose Parts (Crated Unit)

The augers are secured to the auger shaft with two shear bolts and hex lock nuts. If you hit a foreign object or ice jam, the snow thrower is designed so that the bolts may shear. Two replacement shear bolts and nuts are provided for your convenience. Store in a safe place until needed. See Figure 1.

A ATTACHING CLUTCH CABLES	Jam Nuts
Z Cable Fitting	712-0121 (2)
746-0778 (2)
B REPLACEMENT SHEAR BOLTS
Hex Bolts	Hex Lock
710-0890A (2)	Nuts
	712-0429 (2)

Figure 1

Loose Parts (Boxed Unit)

Listed below are the parts of the snow thrower packed loose with units that come unassembled in a box. You will need these parts along with hardware from the hardware pack, illustrated on the previous page, to assemble the equipment. Identify the loose parts before proceeding to assemble. See Figure 2.

	Handle Panel
Auger Control
	Traction Control
	Right Clutch
	Bracket
	Left Clutch
	Bracket
	Shift Rod
Left Handle
	Right Handle
	Extension
	Cord*
Discharge	Chute Directional
Chute	Control

Figure 2

1.Right and Left Handles

2.Handle Panel Assembly

3.Right and Left Clutch Brackets

4.Discharge Chute

5.Chute Directional Control

6.Shift Rod

7.Auger and Traction Controls

8.Hardware Pack

9.Extension Cord (*If Equipped)

NOTE: Follow the Hardware Pack/Loose Parts above and Assembly instructions below per the packaging of your unit. So if your unit came in a box, proceed to page 7, Assembly (Boxed Unit) and use Hardware Pack on page 5 and Loose Parts in Figure 2.

664G, 644E specifications

The MTD 644E and 664G tractors represent a significant leap in agricultural technology and efficiency, designed for diverse farming applications. Known for their robust build and advanced features, these models cater to both small and large-scale agricultural operations.

Starting with the MTD 644E, it is powered by a state-of-the-art diesel engine, providing a reliable performance that enhances productivity. The engine delivers impressive horsepower, allowing farmers to tackle various tasks effortlessly. Its fuel efficiency is a standout feature, ensuring reduced operational costs while still meeting demanding farm requirements. The 644E also features a compact design, making it highly maneuverable in tight spaces while maintaining a sturdy construction that guarantees durability in rugged conditions.

On the other hand, the MTD 664G offers slightly higher horsepower, making it suitable for more intensive agricultural work. This model is equipped with a more advanced engine management system that optimizes performance and fuel consumption, ensuring that farmers can work longer hours without frequent refueling. The 664G’s larger frame accommodates additional implements, expanding its versatility for tasks including plowing, tilling, and harvesting.

Both models are built with user-friendly controls, allowing operators to focus on their tasks without unnecessary distractions. The ergonomic seating and intuitive interface are designed to minimize fatigue during long working days. Additionally, these tractors come with a range of safety features, including effective braking systems and visibility enhancements that prioritize operator safety.

Technologically, both the 644E and 664G incorporate precision farming features that allow for better resource management. Implement compatibility enables seamless integration with various agricultural tools, giving users flexibility in their operations. Regular software updates ensure that the tractors remain at the forefront of agricultural technology, further enhancing performance and efficiency.

In summary, the MTD 644E and 664G tractors are tailored for modern farmers seeking reliability and efficiency. Their powerful engines, compact designs, and cutting-edge technology make them indispensable tools on any farm, capable of handling a multitude of agricultural tasks with ease and precision.

MTD 644E, 664G manual Assembling Your Snow Thrower, Unpacking, Loose Parts Boxed Unit, Crate

Models: 664G 644E