SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

Training

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Thrown objects can cause serious personal injury. Plan your snow-throwing pattern to avoid discharge of material toward roads, bystanders and the like.

6.Keep bystanders, helpers, pets and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

7.Exercise caution to avoid slipping or falling, especially when operating in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used. Remove all doormats, newspapers, sleds, boards, wires and other foreign objects, which could be tripped over or thrown by the auger/ impeller.

2.Always wear safety glasses or eye shields during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Do not operate without wearing adequate winter outer garments. Do not wear jewelry, long scarves or other loose clothing, which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

4.Use a grounded three-wire extension cord and receptacle for all units with electric start engines.

5.Adjust collector housing height to clear gravel or crushed rock surfaces.

6.Disengage all control levers before starting the engine.

7.Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual.

8.Let engine and machine adjust to outdoor temperature before starting to clear snow.

9.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refueling.

f.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark or pilot light (e.g. furnace, water heater, space heater, clothes dryer etc.).

j.Allow machine to cool at least 5 minutes before storing.

3

Page 3
Image 3
MTD 737-0168 manual Important Safe Operation Practices, Training, Preparation

737-0168 specifications

The MTD 737-0168 is a robust and versatile lawn mower designed for both residential and light commercial lawn care. Known for its innovative features and user-friendly design, this mower stands out in the crowded landscape of gardening equipment.

One of the primary characteristics of the MTD 737-0168 is its powerful engine. Equipped with a reliable, fuel-efficient motor, it provides ample power to tackle various lawn types, whether it’s a manicured backyard or a more rugged terrain. The engine’s design emphasizes efficiency, ensuring that users can complete their mowing tasks without interruptions due to fuel depletion or mechanical failures.

The MTD 737-0168 features a wide cutting deck that allows for efficient mowing of larger areas in fewer passes. This deck can typically cut grass to multiple height settings, enabling users to choose the perfect length for their lawn. This flexibility not only promotes healthier grass growth but also ensures that the mower can adapt to different seasonal conditions and types of grass.

In terms of technology, the MTD 737-0168 integrates advanced blade design, promoting cleaner cuts and reducing collateral lawn damage. The blades are often crafted from high-quality materials that enhance durability, ensuring they remain effective for numerous mowing seasons. Additionally, the mower may feature mulching capabilities, allowing users to recycle grass clippings back into the lawn, thereby enriching the soil and reducing waste.

Another noticeable feature of the MTD 737-0168 is its ergonomic design, which aims to enhance user comfort. The handle is generally adjustable, allowing users of different heights to maintain a comfortable posture while mowing. This thoughtful design can help reduce fatigue during longer mowing sessions, making it suitable for homeowners who pride themselves on lawn maintenance.

User-friendly controls are also a key focus of the MTD 737-0168, with easy-to-access throttle and blade engagement options. This accessibility simplifies operation, making it accessible for both experienced users and those new to lawn care.

Overall, the MTD 737-0168 stands as a testament to MTD’s commitment to quality and functionality. With its powerful performance, versatile features, and user-focused design, this mower appeals to a broad audience looking for an efficient solution for maintaining their lawns. It represents a harmonious blend of traditional lawn care requirements with modern technological advancements, making it a worthwhile investment for any homeowner.