3.Always be sure of your footing. A slip and fall can cause serious personal injury. If you feel you are losing your balance, release the blade control handle immediately, and the blade will stop rotating within 3 seconds.

Do Not:

1.Do not mow near drop-offs, ditches or embankments, you could lose your footing or balance.

2.Do not mow slopes greater than 15 degrees as shown on the slope gauge.

3.Do not mow on wet grass. Unstable footing could cause slipping.

Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the mower and the mowing activity. They do not understand the dangers. Never assume that children will remain where you last saw them.

1.Keep children out of the mowing area and under the watchful care of a responsible adult other than the operator.

2.Be alert and turn mower off if a child enters the area.

3.Before and while moving backwards, look behind and down for small children.

4.Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects that may obscure your vision of a child who may run into the mower.

5.Keep children away from hot or running engines. They can suffer burns from a hot muffler.

6.Never allow children under 14 years old to operate a power mower. Children 14 years old and over should read and under- stand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

Service

Safe Handling Of Gasoline:

1.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

2.Use only an approved gasoline container.

3.Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

4.Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

5.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

6Extinguish all cigarettes, cigars, pipes and other sources of ignition.

7.Never fuel machine indoors because flammable vapors will accumulate in the area.

8.Never remove gas cap or add fuel while the engine is hot or run- ning. Allow engine to cool at least two minutes before refueling.

9.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide for fuel expansion.

10.Replace gasoline cap and tighten securely.

11.If gasoline is spilled, wipe it off the engine and equipment. Move unit to another area. Wait 5 minutes before starting the engine.

12.Never store the machine or fuel container near an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

13.To reduce fire hazard, keep mower free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

14.Allow a mower to cool at least 5 minutes before storing.

General Service:

1.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

2.Before cleaning, repairing, or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

3.Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., bent, cracked, worn) Replace blade with the original equipment manufacture’s (O.E.M.) blade only, listed in this manual. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

4.Mower blades are sharp and can cut. Wrap the blade or wear gloves, and use extra caution when servicing them.

5.Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.

6.Never tamper with safety devices. Check their proper operation regularly.

7.After striking a foreign object, stop the engine, disconnect the spark plug wire and ground against the engine. Thoroughly inspect the mower for any damage. Repair the damage before starting and operating the mower.

8.Never attempt to make a wheel or cutting height adjustment while the engine is running.

9.Grass catcher components, discharge cover, and trail shield are subject to wear and damage which could expose moving parts or allow objects to be thrown. For safety protection, frequently check components and replace immediately with original equipment manufacturer’s (O.E.M.) parts only, listed in this manual. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

10.Do not change the engine governor setting or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

11.Check fuel line, tank, cap, and fittings frequently for cracks or leaks. Replace if necessary.

12.Do not crank engine with spark plug removed.

13.Maintain or replace safety labels, as necessary.

14.Observe proper disposal laws and regulations. Improper disposal of fluids and materials can harm the environment.

Do not modify engine

To avoid serious injury or death, do not modify engine in any way. Tampering with the governor setting can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory setting of engine governor.

Average Useful Life

According to the Consumer Products Safety Commission (CPSC) and the U.S. Environmental Protection Agency (EPA), this product has an Average Useful Life of seven (7) years, or 60 hours of operation. At the end of the Average Useful Life, buy a new machine or have the machine inspected annually by an authorized service dealer to ensure that all mechanical and safety systems are working properly and not worn excessively. Failure to do so can result in accidents, injuries or death.

2

Safe

Operation

Practices

WARNING

This machine is equipped with an internal combus- tion engine and should not be used on or near any unimproved forest- covered, brushcovered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting ap- plicable local or provincial laws (if any).

If a spark arrester is used, it should be maintained in effective working order by the operator.

A spark arrester for the muf- fler is available through your nearest engine authorized service dealer.

Notice regarding Emis- sions

Engines which are certified to comply with California and federal EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regu- lar unleaded gasoline, and may include the following emission control systems: Engine Modification (EM) and Three Way Catalyst (TWC) if so equipped.



Page 5
Image 5
MTD 769-03096A warranty Children, General Service

769-03096A specifications

The MTD 769-03096A is a powerful and versatile lawn mower attachment designed to enhance lawn care efficiency. This innovative product is primarily utilized with various MTD lawn mower models, bringing advanced technology and user-friendly features to the forefront of gardening equipment.

One of the standout features of the MTD 769-03096A is its durable construction, which ensures long-lasting performance even in tough mowing conditions. Made from high-quality materials, this attachment is engineered to withstand the wear and tear often associated with outdoor use. Its robust build makes it capable of tackling thick grass and overgrown areas, making it an ideal choice for homeowners and landscaping professionals alike.

The technology behind the MTD 769-03096A includes a powerful cutting mechanism that promotes efficient grass cutting. Its precision-engineered blades are designed to provide a clean and even cut, which is essential for maintaining a healthy lawn. With a cutting width that allows for broad coverage, users can complete their mowing tasks in less time, ultimately increasing productivity.

In addition to its cutting capability, the MTD 769-03096A emphasizes ease of use. Its quick-connect mount system allows for easy attachment and detachment from compatible lawn mowers, saving valuable time during maintenance tasks. Additionally, the design incorporates an adjustable cutting height feature, enabling users to tailor their mowing height according to specific lawn needs. This adaptability is essential for promoting optimal grass health and appearance.

Another notable characteristic is the attachment's lightweight design, which contributes to ease of maneuverability. Even in challenging terrain, users can navigate their lawn with minimal effort, reducing fatigue during extended mowing sessions.

Furthermore, the MTD 769-03096A is compatible with a wide range of MTD mower models, adding to its versatility. This compatibility ensures that users who already own MTD equipment can easily integrate this attachment into their existing setup.

In conclusion, the MTD 769-03096A lawn mower attachment stands out for its durable construction, advanced cutting technology, user-friendly features, and versatility. Whether for residential or professional use, this attachment represents a valuable tool for effective lawn maintenance, catering to the needs of a wide range of users. Its ability to provide a clean cut, adjust cutting heights, and connect easily with various mowers makes it a noteworthy addition to the MTD product line.