ASSEMBLY INSTRUCTIONS

NOTE: Your unit is completely assembled as a blower in the carton. Use the following instructions to convert between a blower and a vacuum.

WARNING: To avoid serious personal injury and damage to the unit, shut unit off before removing or installing add-ons.

CONVERTING TO A VACUUM

1.Loosen the clamping knob on the blower housing counterclockwise.

2.Remove the blower tube.

3.Install the bag elbow and tighten the knob clockwise. (Fig. 1)

Knob

Elbow

Vacuum Bag

Fig. 1

4.Fasten the strap to the shaft above the assist handle, located on the powerhead. (Fig. 2)

CONVERTING TO A BLOWER

1.Remove the vacuum bag.

2.Clip the blower tube to the end of the vacuum tube. (Fig. 3)

Vacuum Tube

Clip

Blower Tube

Fig. 3

3. Install the blower tube and tighten the knob. (Fig. 4)

Knob

Blower Tube

Strap

Shaft

Assist Handle

Fig. 4

Fig. 2

7