![Models 140, 150, E150, E162 & E172](/images/new-backgrounds/100940/10094033x1.webp)
Models 140, 150, E150, E162 & E172
REF. | PART |
| REF. | PART |
|
NO. | NO. | DESCRIPTION | NO. | NO. | DESCRIPTION |
1 | Dash | 36 | Hex Index Washer Screw, | ||
|
| (Includes Plastic Cup for Mitten Grip) | 37 | Carriage Bolt, | |
| Dash | 38 | |||
|
| (Includes Plastic Sleeve for Starter Rope) | 39 | ||
| Dash | 40 | |||
|
| (Includes Plastic Sleeve for Starter Rope) | 41 | ||
2 | Spacer, .325 x .625 | 42 | Axle, .35 x .5 x 20.75 | ||
3 | Screw, | 43 | Jam Lock Nut, | ||
4 | Hex Flange Screw, | 44 | Hex Flange Lock Nut, | ||
5 | Screw, | 45 | Engine Support | ||
6 | 46 | Shave Plate, 2.66 x 19.88 | |||
7 | Hex Nut, | 47 | Extension Spring, .33 x 1.12 | ||
8 | Drive | 48 | Flat Washer, .51 x .75 x .033 | ||
| Drive | 49 | Flat Washer, .265 x .938 x .120 | ||
9 | Pulley | 50 | Belleville Washer, .340 x .872 | ||
10 | Auger Drive Pulley | 51 | Flat Washer, .51 x 1.0 x .125 | ||
11 | Wheel Assembly, 7 x 1.5 | 52 | Lock Washer, 1/4 | ||
12 | Ignition Key | 53 | Plastic Bushing | ||
13 | Ignition Key w/ Plastic Cover | 54 | Ball Bearing, 17mm x 40mm x 12mm | ||
14 | Ignition Nut, | 55 | Cable, 41.78” (includes end spring) | ||
| Jam Nut, | 56 | Shoulder Spacer | ||
15 | Ignition Switch Cap | 57 | Hose Clamp, .49 | ||
16 | Ignition Switch | 58 | Plastic Bushing, .38 | ||
17 | Chute Crank | 59 | Flat Idler Pulley, 1.88 x .50 x 2.12 | ||
18 | Choke Cover | 60 | |||
19 | Spark Plug Cap | 61 | Bearing Cup | ||
20 | 7510009630 | Recoil Handle (Standard) | 62 | Brake Idler Bracket | |
21 | Fuel Line Hose | 63 | Belt Cover | ||
22 | Lock Washer, 5/16 | 64 | Solid Shaft Auger Assembly | ||
23 | Spacer, .630 x .88 x .680 | 65 | Chute Crank Bracket | ||
24 | Internal Lock Washer, 5/8 x 1.058 x .046 | 66 | 110V Extension Cord, | ||
25 | Gas Tank, 1 | 67 | Fuel Tank Support | ||
26 | Fuel Cap for |
|
| E150, E162 & E172 | |
27 | Gas Tank, 2 | 68 | Hex Cap Screw, | ||
|
| E162, E172 | 69 | Hex Cap Screw, | |
28 | Fuel Cap for | 70 | Hex Cap Screw, | ||
29 | 7510009636 | Recoil Handle (Mitten Grip) |
|
| |
30 | Primer Tube |
| Hex Cap Screw, | ||
31 | Primer Bulb |
|
| ||
32 | Auger Housing Assembly | 71 | |||
33 | Screw, | 72 | Rubber Paddle | ||
34 | Cap Screw, | 73 | Rubber Paddle/Spiral | ||
35 | Trus Machine Screw, | 74 | Chute Crank |
IMPORTANT: For a proper working machine, use Factory Approved Parts.
NOTE: Snow thrower features/components vary by model. NOT all parts listed above and pictured on the previous page are standard equipment.
17