MTD E610E, E660G, E640F manual Contents of Hardware Pack

SECTION 4: CONTENTS OF HARDWARE PACK

Lay out the hardware according to the illustration for identification purposes. Part numbers are shown in parentheses. (Hardware pack may contain extra items which are not used on your unit.)

A ATTACHING THE HANDLES		B ATTACHING THE CHUTE ASSEMBLY
Hex Bolts (A)		Hex Bolts
5/16-18 x 1-3/4” Long		1/4-20 x 3/4” Long
(710-3180)		(710-3015)
Hex Bolts
5/16-18 x 3/4” Long	Handle Tabs	Chute Flange
(710-3008)
	(784-5599)	Keepers
Lock Washers		(731-0851)
5/16” I.D.
(736-0119)
Carriage Bolts
5/16-18 x 1-1/2” Long
(710-0262)
		Hex Lock Nuts
		1/4-20 Thread
Cupped Washers		(712-3027)
5/16” I.D.		C ATTACHING THE CHUTE CRANK ASSEMBLY
(736-0242)
Hex Nuts		Flat Washers
5/16” Thread		3/8” I.D. x 5/8” O.D.
(712-3010)		(736-0185)
ATTACHING THE SHIFT ROD
D AND CLUTCH CABLES
Ferrule		Hex Bolt
		5/16-18 x 1-1/2” Long
(711-0677)		(710-0442)
Flat Washers
3/8” I.D. x 5/8” O.D.		Lock Washers
(736-0185)
		5/16” I.D.
		(736-0119)
Hair Pin Clip		Hex Nut
(714-0104)
		5/16” Thread
F AUGER SHEAR BOLTS (SPARES)		(712-3010)
	Hex Lock Nuts
	5/16” Thread
Shear Bolts	(712-0429)	Hair Pin Clip
(710-0890A)
		(714-0104)

Note: Parts are not to actual size.

5