TROUBLESHOOTING

 

 

 

CUTTING ATTACHMENT WILL NOT ADVANCE LINE

 

 

 

CAUSE

 

ACTION

 

Cutting attachment bound with grass

 

Stop the engine and clean cutting attachment

Cutting attachment out of line

 

Refill with new line

Inner reel bound up

 

Replace the inner reel

Cutting head dirty

 

Clean inner reel and outer spool

Line welded

 

Disassemble, remove the welded section and rewind

Line twisted when refilled

 

Disassemble and rewind the line

Not enough line is exposed

 

Push the bump knob and pull out line until 4 inches

 

 

(102 mm) of line is outside of the cutting attachment

 

 

 

CUTTING LINE ADVANCES UNCONTROLLABLY

CAUSE

Oil, cleaner or lubricant in cutting head

For engine service and warranty please call 1-800-426-7701to locate the closest service dealer in your area.

ACTION

Clean and thoroughly dry the cutting head

For boom service and warranty please call 1-800-800-7310

SPECIFICATIONS

DRIVE SHAFT AND CUTTING ATTACHMENT*

Drive Shaft Housing ...........................................................................................................................................................

Aluminum Tube

Throttle Control.............................................................................................................................

Finger-Tip Trigger w/Momentary Switch

Approximate Unit Weight (No fuel, with cutting attachment, shield and D-handle) ............................................................

13 lbs. (5.9 kg)

Cutting Mechanism..............................................................................................................................................

Dual String Cutting Head

Line Spool....................................................................................................................................................................

Bump Line Releaser

Line Spool Diameter ...................................................................................................................................................

4 inches (101.6 mm)

Trimming Line Diameter.........................................................................................................................................

0.105 inches (2.67 mm)

Cutting Path Diameter ...............................................................................................................................................

17 inches (43.18 cm)

7