SECTION 2: ASSEMBLING YOUR SNOW THROWER

NOTE: This Operator’s Manual covers several models. Snow thrower features vary by model. Not all features discussed in this manual are applicable to all snow thrower models.

Loose Parts

The augers are secured to the auger shaft with two shear pins and bow tie cotter pins. If you hit a foreign object or ice jam, the snow thrower is designed so that the pins may shear. Two replacement shear pins and cotter pins are provided for your convenience. See Figure 1. Store these safely until needed.

Cotter Pins

Shear Pins

Figure 1

IMPORTANT: NEVER replace the auger shear pins with standard hex bolts. Any damage to the auger gearbox or other components from using standard bolts will not be covered by your snow thrower’s warranty.

IMPORTANT:

Items Required For Assembly

1.Pair of pliers

2.Engine oil

3.Fresh gasoline

Before Assembly

WARNING: Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

NOTE: Reference to the right hand or left hand side of machine are observed from the operating position.

Assembling Handle

Remove the lower plastic wing nut, cupped washer and carriage bolt from each side of the lower handle. See Figure 2.

Raise the upper handle assembly until it locks over the lower handle.

Look at the lower rear of the snow thrower frame to be sure all the cables are aligned with the cable roller guides. Make sure the spring (found at the end of each cable) is attached to its actuator bracket.

Upper Handle

Steering Cable

Tighten these

Wing Nuts

Lower Handle

Upper

Cable Tie

Shift Rod

 

Shift Rod

Connector

Carriage

 

Bolt

Wing

Cupped

Washer

Nut

 

Lower

 

Shift Rod

 

NOTE: Support Tubes are omitted from the illustration for clarity.

Figure 2

Secure the upper handle and lower handle with the two plastic wing nuts, cupped washers and carriage bolts previously removed.

Tighten the two wing nuts already in place on the upper holes and secure the handles firmly.

Slide the shift rod connector down over the end of the lower shift rod. Tap the connector until it locks over the lower shift rod. See Figure 2.

NOTE: If the connector is not properly assembled, the shift rod will pivot and you will not be able to change speeds or direction.

5

Page 5
Image 5
MTD OGST-3106 Assembling Your Snow Thrower, Loose Parts, Items Required For Assembly, Before Assembly Assembling Handle

OGST-3106 specifications

The MTD OGST-3106 is an innovative and versatile outdoor gas-powered string trimmer designed to meet the demands of both professional landscapers and passionate gardeners. This robust machine combines power, efficiency, and ease of use, making it a top choice for managing grass, weeds, and other vegetation.

One of the standout features of the MTD OGST-3106 is its powerful 31cc 2-cycle engine. This engine is engineered to deliver exceptional performance, allowing users to tackle thick underbrush and heavy grass with ease. The engine is designed for optimal fuel efficiency, reducing the need for frequent refueling during larger jobs. In addition to power, the lightweight design of the trimmer ensures that users can maneuver it effortlessly, reducing fatigue even during prolonged use.

The MTD OGST-3106 incorporates a straight shaft design, which provides extended reach for accessing hard-to-reach areas such as under decks or along fences. This feature enhances its versatility, making it suitable for a variety of applications, from trimming along sidewalks to edging flower beds. Moreover, the unit is equipped with a dual-line cutting head that allows for increased cutting width and efficiency, ensuring a cleaner and faster job.

Another key characteristic of the MTD OGST-3106 is its easy-start technology. The trimmer features user-friendly starting mechanisms that make it simple to get the engine running, even for those who may not have extensive experience with gas-powered equipment. This eliminates some of the common hassles associated with starting similar machines, making it accessible to users of all skill levels.

Durability is a hallmark of the MTD OGST-3106, constructed with high-quality materials that withstand the rigors of outdoor use. Its robust build ensures longevity and reliability over time, even when facing tough environmental conditions. The trimmer also includes ergonomic grips that enhance comfort and control, enabling users to work efficiently while minimizing strain on their hands and wrists.

In conclusion, the MTD OGST-3106 is a powerful and user-friendly gas string trimmer that combines advanced technology with practical features. It is ideal for anyone looking to maintain their outdoor space effectively. Whether you are a professional landscaper or a DIY enthusiast, the MTD OGST-3106 is designed to help you achieve professional-quality results with ease and efficiency. Its blend of power, durability, and ergonomic design sets it apart in the competitive market of outdoor power equipment.