RULES FOR SAFE OPERATION
•All pole saw service, other than the items listed in the user manual safety and maintenance instructions, should be performed by competent pole saw personnel. Do not attempt to repair it yourself; there are no user serviceable parts inside.
•The pole saw will do a better and safer job when used at the rate for which it was intended.
•Use the right tool. Cut wood only. Do not use the pole saw for purposes for which it was not intended. For example, do not use the pole saw for cutting plastic, masonry, or
•Use devices, such as
•There are no other replacement components for achieving kickback protection in accordance with CSA Z62.3.
•Do not operate a pole saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw chain stops moving when the trigger is released.
•Do not attempt operations beyond your capacity or experience.
•Never remove, modify or make inoperative any safety device furnished with your unit.
•This saw is classified by CSA as a Class 2C saw. It is intended for infrequent use by homeowner’s, cottagers and campers, and for such general applications such as clearing, pruning, cutting firewood, etc. It is not intended for prolonged use. If the intended use involves prolonged periods of operation, this may cause circulatory problems in the user’s hands due to vibration. It may be appropriate to use a saw having an
•Safety clothing required by your safety organizations, government regulations, or your employer should be used; otherwise, snug fitting clothing, safety footwear, and hand and ear protection should be worn.
•
•Do not use any other cutting attachment or accessories. Use only original equipment manufacturer replacement parts and accessories, which are designed specifically to enhance the performance and maximize the safe operation of our products. Failure to do so may cause poor performance and possible injury. Use only the chain and bar supplied with this product. Do not use any other cutting attachment. Use of such attachments will void your factory warranty and could result in serious bodily injury.
•Never touch the chain or attempt to service the saw while the engine is running. Make sure all moving parts have stopped. Allow the chain to cool, as the chain can be hot.
•Check the bar and chain at frequent intervals for proper adjustment. Make sure the bar and chain are properly tightened and sharpened. Visually inspect for damage. Repair any damage before restarting or operating the pole saw.
•Do not cut near electrical cables or power lines.
•Do not use the pole saw to fell a tree. Use a standard chain saw for this application.
MAINTENANCE AND STORAGE
•Allow the unit to cool before storing or transporting. Be sure to secure the unit while transporting.
•Always use the transport guard on the bar and chain during transportation and storage.
•Store the unit in a locked up and dry or high and dry place to prevent unauthorized use or damage, out of the reach of children.
•Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris. Clean after each use.
•Keep these instructions. Refer to them often and use them to instruct other users. If you loan someone this unit, also loan them these instructions.
•Only qualified personnel should perform any repairs or maintenance procedures that are not described in this manual.
SAVE THESE INSTRUCTIONS
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING |
| SYMBOL MEANING | ||
|
|
|
|
|
| • SAFETY ALERT SYMBOL |
|
| • GUIDE BAR WARNING |
| Indicates danger, warning or caution. May be used in |
|
| Contact of the guide bar tip with any object should be |
| conjunction with other symbols or pictographs. |
|
| avoided. Tip contact may cause the guide bar to move |
|
|
|
| suddenly upward and backward, which may cause serious |
| • WARNING - READ OPERATOR'S MANUAL | |||
|
|
| injury. | |
| Read the operator’s manual(s) and follow all warnings |
|
| |
|
|
|
| |
| and safety instructions. Failure to do so can result in |
|
|
|
|
|
| • USE BOTH HANDS | |
| serious injury to the operator and/or bystanders. |
|
| |
|
|
| Always use both hands while operating the chain | |
|
|
|
| |
| • WEAR HEAD, EYE AND HEARING PROTECTION |
|
| saw. Never use only one hand to operate the saw. |
| WARNING: Thrown objects and loud noise can |
|
| |
|
|
|
| |
| cause severe eye injury and hearing loss. Wear eye |
|
|
|
|
|
|
| |
| protection meeting ANSI |
|
| • HOT SURFACE WARNING |
| protection when operating this unit. Falling objects can |
|
| Do not touch a hot surface. You may get burned. |
| cause severe head injury. Wear head protection when |
|
| |
|
|
| These parts get extremely hot from operation. They | |
| operating this unit.Use a full face shield when needed. |
|
| |
|
|
| remain hot for a short time after the unit is turned off. | |
|
|
|
| |
| • KEEP BYSTANDERS AWAY |
|
|
|
|
|
| • CHAIN OIL ADJUSTMENT INDICATOR | |
| WARNING: Keep all bystanders, especially children |
|
| |
|
|
| The chain must be continously coated with oil to | |
| and pets, at least 50 feet (15 m) from the operating area. |
|
| |
|
|
| function properly. Make sure to set the Oil Adjustment | |
| • POWER LINES CAN CAUSE SEVERE INJURY |
|
| |
|
|
| Screw to allow a sufficient amount of oil to flow | |
| WARNING: Do not operate unit near power lines. |
|
| continuously onto the chain. |
| Contact with a power line may cause serious injury or |
|
| Use a |
| damage to the unit. Maintain a clearance of at least |
|
| Adjustment Screw. |
| 50 ft (15 m) between the pole saw (including any |
|
|
|
|
|
|
| |
| branches it is contacting) and any electrical line. |
|
|
|
|
|
|
|
|
3