SECTION 6: OPERATING INSTRUCTIONS

OPERATING THE EZ-LINK™SYSTEM

The EZ-Link™system enables the use of these optional add-ons.

Blower/Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . BV720r Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GC720r Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LE720r Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . HS720r Snow Thrower . . . . . . . . . . . . . . . . . . . . . . . . . . . ST720r Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . . SS725r Sweeper/Blower . . . . . . . . . . . . . . . . . . . . . . . . . SB720r Tree Pruner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TP720r Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . TB720r

WARNING: Read and understand operator’s manual for add-on prior to operation.

Removing the Cutting Attachment or Add-Ons:

1.Turn the knob counterclockwise to loosen (Fig. 11).

2.Press and hold the release button (Fig. 11).

3.While firmly holding the upper shaft housing, pull

the cutting attachment or add-on straight out of the EZ-Link™coupler (Fig. 12).

Installing the Cutting Attachment or Add-Ons:

WARNING: To avoid serious personal injury and damage to the unit, shut unit off before removing or installing add-ons.

NOTE: To make installing or removing the add-on easier, place the unit on the ground or on a work bench.

1. Turn knob counterclockwise to loosen (Fig. 11).

EZ-Link™ Coupler

Release Button

 

2.While firmly holding the add-on, push it straight into the EZ-Link™coupler (Fig. 12).

NOTE: Aligning the release button with the guide recess will help installation (Fig. 11).

EZ-Link™Coupler

Release

Release Button

Button Hole

 

 

 

Upper Shaft Housing

Lower Shaft Housing

Fig. 12

3. Turn the knob clockwise to tighten (Fig. 11).

Knob

Guide Recess

Fig. 11

13