Manuals / Brands / Lawn and Garden / Trimmer / MTD / Lawn and Garden / Trimmer

MTD YM26CS C • RUN, WARNING:, WARNING:, WARNING:, A • FULL, B • PARTIAL, SYMBOLMEANING, • SHARP BLADE, • CHOKE CONTROL, • ON/OFF STOP CONTROL, • ON/OFF STOP CONTROL

1 32

Download 32 pages, 1.05 Mb

SECTION 1: RULES FOR SAFE OPERATION

SYMBOLMEANING• THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY

WARNING: Do not operate without the cutting attachment shield in place.

Keep away from the rotating cutting attachment.

• ON/OFF STOP CONTROL

ON / START / RUN

• ON/OFF STOP CONTROL

OFF OR STOP

• HOT SURFACE WARNING

Do not touch a hot muffler or cylinder. You may get burned. These parts get extremely hot from operation. When turned off they remain hot for a short time.

• SHARP BLADE

WARNING: Sharp blade on cutting attachment shield. To prevent serious injury, do not touch line cutting blade.

• DO NOT USE METAL BLADES

WARNING: To prevent serious injury, do not attach or operate the unit with any type of metal blade.

• CHOKE CONTROL

A • FULL choke position.

B • PARTIAL choke position.

C • RUN position.

Contents

IMPORTANT: MTD SOUTHWEST INC 550 N. 54TH STREET, CHANDLER, ARIZONA Before you start assembling your new equipment Copy the model / parent part number here: Copy the serial number here: Call (800)-345-8746 FOR QUESTIONS, CALL 1-800-345-8746IN U.S. OR 1-800-668-1238in CANADA NOTE: WARNING: Starting/Stopping Instructions Cleaning and Storage Instructions OFF SAFETY AND INTERNATIONAL SYMBOLS SYMBOL MEANING • SAFETY ALERT SYMBOL • WARNING - READ OPERATOR'S MANUAL • WEAR EYE AND HEARING PROTECTION SYMBOLMEANING • THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY • ON/OFF STOP CONTROL • HOT SURFACE WARNING • SHARP BLADE APPLICATIONS ADJUSTING THE J-HANDLE DANGER: See Changing the Oil Maintenance and Repair Instructions RECOMMENDED OIL TYPE ADDING OIL TO CRANKCASE – INITIAL USE FUELING UNIT STARTING INSTRUCTIONS Cold Start - First Start of the Day or Engine Ran Out of Fuel Checking the Oil Level START PARTIAL RUN Engine Re-Start- Warm Engine With Fuel Engine Re-start OPERATING THE EZ-LINK™ SYSTEM Removing the Cutting Attachment or Add-Ons: Installing the Cutting Attachment or Add-Ons: HOLDING THE TRIMMER ADJUSTING TRIMMING LINE LENGTH NOTE CAUTION: TIPS FOR BEST TRIMMING RESULTS DECORATIVE TRIMMING MAINTENANCE SCHEDULE DO NOT FREQUENCY MAINTENANCE REQUIRED LINE INSTALLATION FOR THE SPEEDSPOOL® Winding the Inner Reel With New Line INSTALLING A PREWOUND REEL Releasing the Inner Reel Cleaning the SpeedSpool CLEANING THE SPEEDSPOOL® Line Installation for the SpeedSpool SPEEDSPOOL® REPLACEMENT PARTS CHECKING THE OIL LEVEL Changing the Oil CHANGING THE OIL AIR FILTER MAINTENANCE Cleaning the Air Filter VOID CARBURETOR ADJUSTMENT Check Fuel Oil and Fuel Information Clean Air Filter Air Filter Maintenance ROCKER ARM CLEARANCE Replacing the Spark Plug REPLACING THE SPARK PLUG CAUTION: SPARK ARRESTOR MAINTENANCE Rocker Arm Clearance ACCESSORIES/REPLACEMENT PARTS CLEANING STORAGE Store the unit in one of three (3) positions: LONG TERM STORAGE TRANSPORTING ENGINE WILL NOT START ENGINE WILL NOT IDLE ENGINE WILL NOT ACCELERATE ENGINE LACKS POWER OR STALLS WHEN CUTTING CUTTING HEAD WILL NOT ADVANCE LINE ENGINE DRIVE SHAFT & CUTTING ATTACHMENT Page Page Page California / EPA Emission Control Warranty Statement; Your Warranty Rights and Obligations HOW TO OBTAIN SERVICE: This limited warranty does not provide coverage in the following cases: