CROSSOVER MOUNTING
When choosing a location to mount the crossover, accessibility is important. Adjustment will need to be made like tweeter attenuation. Keep in mind the cross- over has electronic components inside, and must be mounted so that no moisture can make contact.
WIRING
Two things to take into consideration when installing these separates is the age of the factory wiring and gauge (size) of wire. If the vehicle is an older model or was pre-wired with small wire (18 gauge or less), running new high performance wire (http://www.streetwires.com/products/speakerCable/microUltraCable.cfm) will be necessary. The speaker wire should run from the amplifier’s output terminals, under the carpet and through the factory rubber boot (loom) that protects the wires in the inner door jam. If the factory boot cannot be used, take other measures to protect these wires as best you can. Sometimes the door has to be completely removed
to use the factory boot. If this is something that you do not feel comfortable doing, please ask a professional to help you. The wires should originate from the amplifier and attach to the crossover inputs.
CROSSOVER CONNECTIONS
Each TX speaker system has a 2-way 18dB/6dB oct separate crossover network. The crossover networks allow the drivers to recreate the frequencies within a precisely designed range so that the speakers do not become distorted by trying to reproduce frequencies that they are physically unable to reproduce. This feature ensures that the tweeter does not receive low bass notes and the mid bass driver doesn’t receive high frequencies. The 18dB (tweeter)/6dB (mid) oct means the slope, or the amount of other frequencies that will be affected, is fairly narrow. This design complements both the tweeter and mid and provides greater musical detail. Pay close attention to the markings on the crossover to be certain the correct speakers are in the correct outlet. If a tweeter is accidentally asked to play the frequencies reserved for a mid-bass driver, it will be damaged.
CROSSOVER CONNECTIONS FOR TX1000
Separate 1-way 18dB/oct crossovers are included with the TX1000 tweeters, which allows the drivers to recreate the frequencies within a precisely designed range. This ensures that the speakers do not become distorted by trying to reproduce frequencies that they are physically unable to reproduce. The 18dB/oct means the slope, or how many other frequencies will be affected, is fairly narrow. This design complements both the tweeter and mid-bass to provide greater musical detail.
FOR TX1000 ONLY
