Multi-Tech Systems ISI5634UPCI manual Hardware Installation, Fan-Out Cable for ISI Server Card

Chapter 2 – Hardware Installation

5.Locate the unused PCI slot you will be using for your ISI Card and remove the slot cover according to instructions in your computer's

6.Install the ISI Card into the selected expansion slot in the same manner as any other add-on card, as instructed in your computer’s documentation.

7.Fasten the retaining bracket to the computer chassis and replace cover on the computer.

8.Cabling. The -4 ISI Server card has one RJ-45 receptacle and one fan-out cable; the -8 ISI Server card has two RJ-45 receptacles and two fan-out cables. Each fan-out cable extends connections for four modems from the RJ-45 plug to four RJ-11 plugs. Each RJ-11 plug should then be attached to a phone line receptacle. Attach the RJ-45 connector into the appropriate RJ45 receptacle on the ISI Server card.

To view a pinout diagram of the ISI Server Card Fan-Out Cables, see Appendix A of this manual.

Fan-Out Cable for ISI Server Card

8